修复你的物品 社区 商店

G603 Wheel Encoder Replacement

简介

Logitech G603 mouse wheel encoder replacement.

The encoder is a Logitech 210-001795. It's possible the PCB color on replacements is different than what's inside the G603.

你所需要的

  1. G603 Wheel Encoder Replacement, Remove Top Cover & Batteries: 步骤 1 中的图像 1，1

    • Remove magnetic top cover, batteries, and wireless receiver (if currently stored inside the mouse)

    编辑

  2. G603 Wheel Encoder Replacement, Remove Mouse Feet: 步骤 2 中的图像 1，3 G603 Wheel Encoder Replacement, Remove Mouse Feet: 步骤 2 中的图像 2，3 G603 Wheel Encoder Replacement, Remove Mouse Feet: 步骤 2 中的图像 3，3

    • Carefully remove the feet to reveal the 4 screws holding the top and bottom shells together

    • NOTE: These feet can be removed carefully enough to be reused. Only the top and bottom feet need to be removed, not the one around the sensor

    编辑

  3. G603 Wheel Encoder Replacement, Remove the four Phillips #00 Screws: 步骤 3 中的图像 1，1

    • Use Phillips #00 to remove the four bottom screws

    编辑

  5. G603 Wheel Encoder Replacement, Separate the Top and Bottom Shells: 步骤 4 中的图像 1，3 G603 Wheel Encoder Replacement, Separate the Top and Bottom Shells: 步骤 4 中的图像 2，3 G603 Wheel Encoder Replacement, Separate the Top and Bottom Shells: 步骤 4 中的图像 3，3

    • Start at the top above the left and right click and slowly work your way around the shells until they are separated

    • Be careful not to damage the power connector or ribbon cable going from the top shell's boards/battery to the bottom shell's board

    编辑

  6. G603 Wheel Encoder Replacement, Unplug Power and Ribbon Cables: 步骤 5 中的图像 1，3 G603 Wheel Encoder Replacement, Unplug Power and Ribbon Cables: 步骤 5 中的图像 2，3 G603 Wheel Encoder Replacement, Unplug Power and Ribbon Cables: 步骤 5 中的图像 3，3

    • Start with the red and black power cable and gently pull it out

    • Once power cable is removed, you should be able to unfold the two halves and unplug the white ribbon cable

    编辑

  7. G603 Wheel Encoder Replacement, Remove Encoder Ribbon Cable: 步骤 6 中的图像 1，1

    • Gently pull out the black ribbon cable connecting the encoder board to the main board

    编辑

  8. G603 Wheel Encoder Replacement, Remove 5 Phillips #00 Screws: 步骤 7 中的图像 1，1

    • Remove the Phillips #00 screws holding the encoder board in place

    编辑

  9. G603 Wheel Encoder Replacement, Remove Encoder Board & Wheel: 步骤 8 中的图像 1，1

    • Remove the encoder board from the bottom shell

    • Gently remove the wheel from the older encoder board

    • NOTE: The old wheel can be reused in the replacement encoder board

    编辑
结论

To reassemble your device, follow these instructions in reverse order.

另外一个人完成了本指南。

作者

与1其他贡献者

Jim

于06/17/23注册

331 声望

创作了2篇指南

徽章: 10

+ 7更多徽章

0条评论

添加评论

浏览统计数据:

过去 24 小时： 10

过去 7 天： 40

过去 30 天： 192

总计 1,337