Fujifilm Instax Minion Camera Shell Replacement

简介

This replacement is fairly straight forward. The only tool you will need is a #00 Phillips screwdriver and/or an extra long #00 Phillips screwdriver. Optionally, you could use a nylon spudger to help pry open the camera shell.

你所需要的

步骤 1 Camera Shell

Fujifilm Instax Minion Camera Shell Replacement, Camera Shell: 步骤 1 中的图像 1，3

Fujifilm Instax Minion Camera Shell Replacement, Camera Shell: 步骤 1 中的图像 2，3

Fujifilm Instax Minion Camera Shell Replacement, Camera Shell: 步骤 1 中的图像 3，3

Remove the six 4.5 mm #00 Phillips screws from the bottom, left, and right sides.

翻译

步骤 2

Fujifilm Instax Minion Camera Shell Replacement: 步骤 2 中的图像 3，3

Use a spudger to remove the film slot guard on the top of the camera.
Remove the one 4.5 mm #00 Phillips screw under the slot guard.

翻译

步骤 3

Fujifilm Instax Minion Camera Shell Replacement: 步骤 3 中的图像 3，3

Press the release tab on the back of the camera to open the film compartment.
Remove the film cartridge within this compartment.

翻译

步骤 4

Fujifilm Instax Minion Camera Shell Replacement: 步骤 4 中的图像 3，3

Press the battery cover in and down to remove it.
Remove any batteries within.

翻译

步骤 5

Fujifilm Instax Minion Camera Shell Replacement: 步骤 5 中的图像 3，3

Use a plastic opening tool to help pry the front and back shells apart.
With the camera facing down, remove only the back shell.

翻译

步骤 6

Fujifilm Instax Minion Camera Shell Replacement: 步骤 6 中的图像 3，3

Carefully peel the front side of the shell away.
As you lift the front shell, be careful to not pull too hard since there is a spring attached to the shell and the camera body.
Using a set of tweezers, detach the spring from the body. The spring will retract into the black and gray ring on the front shell.