简介

A guide on how to take out the many screws located on the inside, metal cover and how to install an LCD.

Remove the screws from the bottom of the camera using the tri-wing screwdriver.
  • Remove the screws from the bottom of the camera using the tri-wing screwdriver.

    • Three 5.4 mm tri-head screws.

添加评论

Remove screws from charger side of camera using the Phillips 00 screwdriver.
  • Remove screws from charger side of camera using the Phillips 00 screwdriver.

    • Two 3.3 mm Phillips #00 screws.

添加评论

  • Remove screws from wrist-strap side of camera using the Phillips 00 screwdriver.

    • Two 3.3 mm Phillips #00 screws.

添加评论

  • Separate the front and back casing using the spudger.

  • Gently pull apart the two casings.

  • Pull the back casing away from the camera.

添加评论

  • Remove screws from the casing covering the LCD using the Phillips 00 screwdriver.

    • Remove the fifteen 2.9 mm Phillips #00 screws.

添加评论

  • Slide casing out using the spudger.

添加评论

  • Gently remove the LCD display data cable by gripping the end that is connected to the motherboard and pulling out.

添加评论

结论

To reassemble your device, follow these instructions in reverse order.

另外一个人完成了本指南。

Sarah Looper

于2013年03月11日注册

76 信誉积分

创作了7篇指南

团队

Clemson, Team 13-4, Benson Spring 2013 Clemson, Team 13-4, Benson Spring 2013 的会员

CLEM-BENSON-S13S13G4

2 名成员

创作了8篇指南

Great Guide! Worked great to replace my screen!

Daniel - 回复

Awesome guide! BEST WORK I'VE EVER SEEN ON A REPAIR GUIDE

Johnston Thayer - 回复

Shutter button replacement was great too!

Daniel -

添加评论

浏览统计数据:

过去的24小时: 1

过去的7天: 1

过去的30天: 5

总计 628