简介

The flash battery provides the power necessary to create the flash. This guide describes how to find and remove this battery in order to install a new one.

Remove the screws from the bottom of the camera using the tri-wing screwdriver.
  • Remove the screws from the bottom of the camera using the tri-wing screwdriver.

    • Three 5.4 mm tri-head screws.

添加评论

Remove screws from charger side of camera using the Phillips 00 screwdriver.
  • Remove screws from charger side of camera using the Phillips 00 screwdriver.

    • Two 3.3 mm Phillips #00 screws.

添加评论

  • Remove screws from wrist-strap side of camera using the Phillips 00 screwdriver.

    • Two 3.3 mm Phillips #00 screws.

添加评论

  • Separate the front and back casing using the spudger.

  • Gently pull apart the two casings.

  • Pull the back casing away from the camera.

添加评论

  • Remove screws from motherboard using the Phillips 00 screwdriver.

    • Two 2.5 mm widehead Phillips screws

    • One 3.3 mm #00 Phillips screws

    • Three 2.5 mm #00 Phillips screws (black screws)

添加评论

  • Rotate the front cover clockwise onto its side and remove the single screw on the side using a Phillips 00 screwdriver.

    • Remove 3.3 mm #00 Phillips screw from the side of the front screen.

添加评论

  • Firmly grasp both the motherboard and front cover. Slowly pull the front cover away from the motherboard.

    • Do not be alarmed if it takes substantial pressure to separate the two.

添加评论

  • Gently remove battery from casing.

添加评论

结论

To reassemble your device, follow these instructions in reverse order.

另外一个人完成了本指南。

Sarah Looper

于2013年03月11日注册

76 信誉积分

创作了7篇指南

团队

Clemson, Team 13-4, Benson Spring 2013 Clemson, Team 13-4, Benson Spring 2013 的会员

CLEM-BENSON-S13S13G4

2 名成员

创作了8篇指南

What is the battery number so you can have a replacement ready?

attic77 - 回复

添加评论

浏览统计数据:

过去的24小时: 0

过去的7天: 1

过去的30天: 7

总计 358