修复你的物品 社区 商店

Fujifilm FinePix XP70 Back Button Replacement

简介

This guide will enable the user to replace the back panel buttons in the FujiFilm FinePix XP70.

你所需要的

  1. Fujifilm FinePix XP70 Back Button Replacement, Battery: 步骤 1 中的图像 1，1

    • Power off the camera.

    • Leaving the camera on while removing presents the risk of electrical shock or permanent data loss.

    编辑

  2. Fujifilm FinePix XP70 Back Button Replacement: 步骤 2 中的图像 1，2 Fujifilm FinePix XP70 Back Button Replacement: 步骤 2 中的图像 2，2

    • Push down on the center button and turn the dial on the side counterclockwise to open the battery compartment.

    编辑

  3. Fujifilm FinePix XP70 Back Button Replacement: 步骤 3 中的图像 1，1

    • Pull the orange tab towards the hinge to release the battery.

    编辑

  4. Fujifilm FinePix XP70 Back Button Replacement, Button: 步骤 4 中的图像 1，2 Fujifilm FinePix XP70 Back Button Replacement, Button: 步骤 4 中的图像 2，2

    • Pry the black button plate off using a plastic opening tool.

    • Buttons can fall out easily.

    • It's easiest to start from the side exposed by an open battery compartment.

    • When putting this plate back on, orientate the buttons as shown to properly fit back into the plate.

    编辑

  5. Fujifilm FinePix XP70 Back Button Replacement: 步骤 5 中的图像 1，1

    • Pull the three buttons out.

    编辑

  6. Fujifilm FinePix XP70 Back Button Replacement, Front and Back Panel: 步骤 6 中的图像 1，1

    • Remove one Phillips screw with a Phillips head 0 screwdriver

    • Remove one hex head screw with a hex 1.3 screwdriver bit.

    编辑

  8. Fujifilm FinePix XP70 Back Button Replacement: 步骤 7 中的图像 1，1

    • Unscrew two 4.0mm long hex head screws with a hex 1.3 screwdriver bit.

    编辑

  9. Fujifilm FinePix XP70 Back Button Replacement: 步骤 8 中的图像 1，1

    • Unscrew five 4.0mm screws with a Phillips head 0 screwdriver

    编辑

  10. Fujifilm FinePix XP70 Back Button Replacement: 步骤 9 中的图像 1，1

    • Pry the black bottom plate off using a plastic opening tool.

    • It is easier to start on the side of the open battery compartment.

    编辑

  11. Fujifilm FinePix XP70 Back Button Replacement: 步骤 10 中的图像 1，2 Fujifilm FinePix XP70 Back Button Replacement: 步骤 10 中的图像 2，2

    • Pry the front plate off using a plastic opening tool.

    • It's recommended to start at the ridge on the top or bottom side.

    编辑

  12. Fujifilm FinePix XP70 Back Button Replacement: 步骤 11 中的图像 1，1

    • Lift off the front plate.

    编辑

  13. Fujifilm FinePix XP70 Back Button Replacement: 步骤 12 中的图像 1，3 Fujifilm FinePix XP70 Back Button Replacement: 步骤 12 中的图像 2，3 Fujifilm FinePix XP70 Back Button Replacement: 步骤 12 中的图像 3，3

    • Pry the back plate off with a plastic opening tool

    编辑

  14. Fujifilm FinePix XP70 Back Button Replacement, Back Panel: 步骤 13 中的图像 1，1

    • Pry the two latches off using a spudger.

    • It takes some force to pry the latches off, so be careful to not break them.

    编辑

  15. Fujifilm FinePix XP70 Back Button Replacement: 步骤 14 中的图像 1，3 Fujifilm FinePix XP70 Back Button Replacement: 步骤 14 中的图像 2，3 Fujifilm FinePix XP70 Back Button Replacement: 步骤 14 中的图像 3，3

    • Pry the remaining latches with a plastic opening tool.

    • It's best to start on the opposite side. Then pry off the top and end at the bottom.

    • It may take some force to remove this, but be careful to not break the latches off.

    编辑

  16. Fujifilm FinePix XP70 Back Button Replacement: 步骤 15 中的图像 1，1

    • Pull the two halves apart.

    • Reattach the LCD ribbon cable into the slot before closing the halves when reassembling.

    编辑

  17. Fujifilm FinePix XP70 Back Button Replacement: 步骤 16 中的图像 1，2 Fujifilm FinePix XP70 Back Button Replacement: 步骤 16 中的图像 2，2

    • Unscrew seven 4.0 mm screws with a Phillips 00 screwdriver.

    • Unscrew four 3.0 mm screws with a Phillips 00 screwdriver..

    编辑

  18. Fujifilm FinePix XP70 Back Button Replacement, Back Button: 步骤 17 中的图像 1，1

    • Lift of the metal panel using a plastic opening tool.

    编辑

  19. Fujifilm FinePix XP70 Back Button Replacement: 步骤 18 中的图像 1，1

    • Remove the desired button(s).

    • Handle the buttons with care since they easily fall off.

    编辑
结论

To reassemble your device, follow these instructions in reverse order.

作者

与3其他贡献者

sandino santos

于03/22/17注册

101 声望

撰写一个指南

徽章: 3

团队

UMass Dartmouth, Team S7-G3, Julie Spring 2017 UMass Dartmouth, Team S7-G3, Julie Spring 2017 的会员

UMASSD-JULIE-S17S7G3

4 名成员

创作了12篇指南

0条评论

添加评论

浏览统计数据:

过去 24 小时： 0

过去 7 天： 0

过去 30 天： 1

总计 292