1. Locate the battery door marked “BATT” on the bottom of the camera.
    • Locate the battery door marked “BATT” on the bottom of the camera.

    添加评论

  2. Pull the battery door tab upward and press in the direction indicated by the arrow on the tab.
    • Pull the battery door tab upward and press in the direction indicated by the arrow on the tab.

    添加评论

  3. 传播 Fixmas 欢乐
    Get $12 off your purchase of $50 or more with code FIXMAS12
    传播 Fixmas 欢乐
    Get $12 off your purchase of $50 or more with code FIXMAS12
    • Remove the battery by pulling the battery door outward.

    添加评论

    • Ensure that the clear plastic strip is below the new battery.

    • Place the new 3 Volt CR2 Lithium Battery in the battery compartment.

    添加评论

结论

After inserting new battery, close the battery door to finish repair.

2等其他人完成本指南。

Eric Nicolai

于2011年01月10日注册

679 信誉积分

创作了6篇指南

团队

Cal Poly, Team 13-5, Forte Winter 2011 Cal Poly, Team 13-5, Forte Winter 2011 的会员

CPSU-FORTE-W11S13G5

5 名成员

创作了6篇指南

添加评论

浏览统计数据:

过去的24小时: 0

过去的7天: 0

过去的30天: 1

总计 1,689