跳转到主内容

简介

The Fugoo Tough XL speaker has an external shell that can be removed to make necessary repairs.

  1. Fugoo Tough XL Case Replacement, Case: 步骤 1 中的图像 1,1
    • Use a #3 Hex Screwdriver to unscrew the four screws (3mm).

  2. Fugoo Tough XL Case Replacement: 步骤 2 中的图像 1,2 Fugoo Tough XL Case Replacement: 步骤 2 中的图像 2,2
    • Gently remove the outer casing.

    • It should be relatively easy to pull apart, but in the case that it is not easy, don't be afraid to apply the necessary force to pull them apart.

  3. Fugoo Tough XL Case Replacement: 步骤 3 中的图像 1,2 Fugoo Tough XL Case Replacement: 步骤 3 中的图像 2,2
    • Pull the device from the external case.

    • Unscrew all of the 12mm T-Head screws using a T10 Screwdriver.

    • Unscrew all of the 6mm T-Head screws using a T10 Screwdriver.

  4. Fugoo Tough XL Case Replacement: 步骤 4 中的图像 1,3 Fugoo Tough XL Case Replacement: 步骤 4 中的图像 2,3 Fugoo Tough XL Case Replacement: 步骤 4 中的图像 3,3
    • Use your hands to gently remove the side plates.

    • Use the plastic opening tool to pry off the back plate.

    • It is best to work on the side with the Fugoo trademark.

  5. Fugoo Tough XL Case Replacement: 步骤 5 中的图像 1,1
    • Slowly pull the front casing from the back casing. If possible, try to avoid putting any tension on the connected cables.

    • Separate the two at a slow, consistent pace to avoid damaging the speaker cables.

结论

To reassemble your device, follow these instructions in reverse order.

另外一个人完成了本指南。

Abdul

于2017年02月17日注册

527 声望

创作了4篇指南

团队

USF Tampa, Team S19-G1, Hoffman Spring 2017 USF Tampa, Team S19-G1, Hoffman Spring 2017 的会员

USFT-HOFFMAN-S17S19G1

4 名成员

创作了5篇指南

0条评论

添加评论

浏览统计数据:

过去 24 小时: 0

过去 7 天: 2

过去 30 天: 5

总计 835