修复你的物品 社区 商店

FlySky FS-TH9X Antenna Wire Disconnected

简介

The antenna wire could have come out and disconnected from the motherboard. Carefully connect the socket on the motherboard to the connector on the wire.

你所需要的

  1. FlySky FS-TH9X Antenna Wire Disconnected, FlySky FS-TH9X Antenna Wire Disconnected: 步骤 1 中的图像 1，1

    • On the back of the remote, locate the antenna box labeled in red.

    编辑

  2. FlySky FS-TH9X Antenna Wire Disconnected: 步骤 2 中的图像 1，1

    • Unplug the wire that connects the antenna box to the controller.

    编辑

  3. FlySky FS-TH9X Antenna Wire Disconnected: 步骤 3 中的图像 1，1

    • On either side of the box, squeeze the clips and pull up to release the antenna box away from its socket.

    编辑

  5. FlySky FS-TH9X Antenna Wire Disconnected: 步骤 4 中的图像 1，1

    • Unscrew the two 2.5 mm Phillips #1 screws with a screwdriver and carefully remove the front plate.

    编辑

  6. FlySky FS-TH9X Antenna Wire Disconnected: 步骤 5 中的图像 1，1

    • Once you remove it, you will see a wire that is connected to the antenna, and a motherboard.

    编辑

  7. FlySky FS-TH9X Antenna Wire Disconnected: 步骤 6 中的图像 1，1

    • Locate the brass colored socket and the end of the wire and carefully connect them together.

    • It should click together.

    编辑

  8. FlySky FS-TH9X Antenna Wire Disconnected: 步骤 7 中的图像 1，1

    • Once connected assemble the box back together.

    编辑
结论

To reassemble your device, follow these instructions in reverse order.

0条评论

添加评论

浏览统计数据:

过去 24 小时： 0

过去 7 天： 0

过去 30 天： 2

总计 90