修复你的物品 社区 商店

Flip Video Ultra USB connector Replacement

简介

This guide will walk you through how to remove and replace the USB connector should your device be broken or malfunctioning.

你所需要的

  1. Flip Video Ultra USB connector Replacement, USB connector: 步骤 1 中的图像 1，1

    • Unlock the battery cover by sliding the switch to the unlock position.

    编辑

  2. Flip Video Ultra USB connector Replacement: 步骤 2 中的图像 1，1

    • Remove the battery cover by sliding it down the camera.

    编辑

  3. Flip Video Ultra USB connector Replacement: 步骤 3 中的图像 1，1

    • Remove the batteries.

    编辑

  4. Flip Video Ultra USB connector Replacement: 步骤 4 中的图像 1，1

    • Slide the black upper casing off from the device.

    • This is a bit hard to get off, so don't be afraid to use a bit of force. There is no lock.

    编辑

  6. Flip Video Ultra USB connector Replacement: 步骤 5 中的图像 1，2 Flip Video Ultra USB connector Replacement: 步骤 5 中的图像 2，2

    • Remove the six 1mm screws from front of the camera with the Phillips Head screwdriver.

    编辑

  7. Flip Video Ultra USB connector Replacement: 步骤 6 中的图像 1，1

    • Remove the top casing from the bottom to reveal the inner circuit board.

    编辑

  8. Flip Video Ultra USB connector Replacement: 步骤 7 中的图像 1，2 Flip Video Ultra USB connector Replacement: 步骤 7 中的图像 2，2

    • When removing the back panel, the rubber buttons will become loose and likely fall off the board. This is normal and can easily placed back on the board once finished.

    • Remove the six 1mm screws with the 1 Phillips head screwdriver.

    编辑

  9. Flip Video Ultra USB connector Replacement: 步骤 8 中的图像 1，2 Flip Video Ultra USB connector Replacement: 步骤 8 中的图像 2，2

    • Gently separate the circuit board from the casing.

    编辑

  10. Flip Video Ultra USB connector Replacement: 步骤 9 中的图像 1，2 Flip Video Ultra USB connector Replacement: 步骤 9 中的图像 2，2

    • Remove the three 1mm screws from the USB connector and back casing with the Phillips Head screwdriver.

    编辑

  11. Flip Video Ultra USB connector Replacement: 步骤 10 中的图像 1，2 Flip Video Ultra USB connector Replacement: 步骤 10 中的图像 2，2

    • Gently lift the usb connector using the Plastic opening tool.

    • Using tweezers, remove the cord from the motherboard by gently lifting the connector.

    • The connector will be easier to remove if you wiggle the tweezers while lifting.

    编辑

  12. Flip Video Ultra USB connector Replacement: 步骤 11 中的图像 1，1

    • Fully remove the USB connector and replace it with the new USB connector.

    编辑
结论

To reassemble your device, follow these instructions in reverse order.

另外一个人完成了本指南。

作者

与3其他贡献者

Nathaniel Ruf

于10/18/16注册

514 声望

创作了5篇指南

徽章: 5

+ 2更多徽章

团队

UMass Dartmouth, Team 5-7, Martin Fall 2016 UMass Dartmouth, Team 5-7, Martin Fall 2016 的会员

UMASSD-MARTIN-F16S5G7

3 名成员

创作了10篇指南

2条评论

My USB port broke off so is there anyway I could save my videos that where om there

Corrina Guerrero - 回复

Where do you purchase the replacement usb connector?

DeEtte Moore - 回复

添加评论

浏览统计数据:

过去 24 小时： 0

过去 7 天： 0

过去 30 天： 9

总计 1,038