Fixing the Error Code 165-6596

简介

This error always occurs on any amiibo compatible game/software (except for Mario Kart 8 if not on the amiibo Mii suits section), due to the NFC board being either disconnected from the GamePad or completely fried. In this tutorial, you will reseat the NFC board back to where it belongs.

Credit: Mod and Pop Thrift (the original video)

你所需要的

步骤 1 Removing the stylus and battery lid

Fixing the Error Code 165-6596, Removing the stylus and battery lid: 步骤 1 中的图像 1，2

Fixing the Error Code 165-6596, Removing the stylus and battery lid: 步骤 1 中的图像 2，2

Remove the stylus. This in order to correctly remove the back cover
Unscrew the battery lid with the P00 Philps Screwdriver.

编辑

步骤 2 Removing the battery

Fixing the Error Code 165-6596, Removing the battery: 步骤 2 中的图像 1，1

After removing the lid, carefully remove the cable connecting the battery to the motherboard and lift up the battery

编辑

步骤 3 Removing the back cover

Fixing the Error Code 165-6596, Removing the back cover: 步骤 3 中的图像 1，1

Remove the screw covers with the pick and use the Tri-wing Screwdriver to unscrew the remaining screws around the GamePad.
Lift up the back cover
Lift up gently, as the rumble motor is attached

编辑

步骤 4 Reseating the NFC board

Fixing the Error Code 165-6596, Reseating the NFC board: 步骤 4 中的图像 1，1

I have put a circle around the correct placement of the NFC board. This is how it should look like.
If the NFC board is detached, gently reseat it back to where it was.
If the NFC board seated correctly, gently remove and gently reseat it.

编辑

结论

To reassemble your device, follow these instructions from Step 3 in reverse order. If the problem persists (even after multiple attempts), it might be time to order a replacement part.