跳转到主内容

修复你的物品

维修的权力

配件 & 工具

配件

没有特定配件。

  1. Flip device upside down and remove the 4 foam pads at each corner.
    • Flip device upside down and remove the 4 foam pads at each corner.

    • Remove the 4 screws using a Philips Screwdriver.

    • Gently lift the case off of the body and set down in a safe place.

  2. Manta 螺丝刀工具包

    日常维修的112个替换头

    Upgrade Your Toolbox

    Manta 螺丝刀工具包

    Upgrade Your Toolbox
  3. Unscrew the 5 screws in the base circuit board.
    • Unscrew the 5 screws in the base circuit board.

  4. Use the tweezers to slightly lift the circuit board, allowing the cylindrical alarm piece to slide out.
    • Use the tweezers to slightly lift the circuit board, allowing the cylindrical alarm piece to slide out.

  5. Check if the wires are secured.
    • Check if the wires are secured.

    • If they are not attached, you may re-solder it together. If they are attached, that means it is a faulty alarm and should replace it.

结论

To reassemble your device, follow these instructions in reverse order.

3等其他人完成本指南。

Nicholas Roppolo

于2013年10月25日注册

384 信誉积分

创作了3篇指南

添加评论

浏览统计数据:

过去的24小时: 0

过去的7天: 0

过去的30天: 2

总计 733