修复你的物品 社区 商店

Fitbit Charge HR Vibration Motor Replacement

简介

Has your Fitbit Charge HR stopped vibrating? Perhaps your Fitbit vibration motor has gone bad. This guide is a tear-down of the Fitbit Charge HR demonstrating how to replace the Vibration Motor for the Fitbit Charge HR.

你所需要的

  1. Fitbit Charge HR Vibration Motor Replacement, Vibration Motor: 步骤 1 中的图像 1，1

    • Remove the four 2.9 mm screws from the back of the display using a Torx screwdriver.

    • Remove the back cover from the device.

    编辑

  2. Fitbit Charge HR Vibration Motor Replacement: 步骤 2 中的图像 1，3 Fitbit Charge HR Vibration Motor Replacement: 步骤 2 中的图像 2，3 Fitbit Charge HR Vibration Motor Replacement: 步骤 2 中的图像 3，3

    • Remove the two 2.9 mm Torx screws holding the circuit board in place.

    • Carefully pry the board out using an opening tool.

    编辑

  4. Fitbit Charge HR Vibration Motor Replacement: 步骤 3 中的图像 1，1

    • Remove the motherboard assembly from the device by gently lifting.

    编辑

  5. Fitbit Charge HR Vibration Motor Replacement: 步骤 4 中的图像 1，2 Fitbit Charge HR Vibration Motor Replacement: 步骤 4 中的图像 2，2

    • Locate the vibration motor on the motherboard.

    • Desolder the red and black wires connected to the motherboard from the vibration motor.

    • Red wire is located closer to the outside. Black wire is closer to the inside of the motherboard.

    • Replace with new vibration motor.

    编辑
结论

To reassemble your device, follow these instructions in reverse order.

0条评论

添加评论

浏览统计数据:

过去 24 小时： 0

过去 7 天： 1

过去 30 天： 10

总计 391