跳转到主内容

简介

Simple step-by-step instructions to replace the Refrigerator Water Filter Head & Tube Assembly WR17X12203.

  1. Filter Housing Replacement for GE Refrigerators model GSS25KSW / GSF25KGW, Filter Housing for GE Refrigerators: 步骤 1 中的图像 1,1
    • Disconnect the electric plug from the wall.

  2. Filter Housing Replacement for GE Refrigerators model GSS25KSW / GSF25KGW: 步骤 2 中的图像 1,1
    • Turn off or push down off water main valve from the wall.

  3. Filter Housing Replacement for GE Refrigerators model GSS25KSW / GSF25KGW: 步骤 3 中的图像 1,3 Filter Housing Replacement for GE Refrigerators model GSS25KSW / GSF25KGW: 步骤 3 中的图像 2,3 Filter Housing Replacement for GE Refrigerators model GSS25KSW / GSF25KGW: 步骤 3 中的图像 3,3
    • Remove the back panel with 6 screws from the back panel using a 8 mm nut driver.

  4. Filter Housing Replacement for GE Refrigerators model GSS25KSW / GSF25KGW: 步骤 4 中的图像 1,2 Filter Housing Replacement for GE Refrigerators model GSS25KSW / GSF25KGW: 步骤 4 中的图像 2,2
    • Disconnect the water supplied line from the refrigerator using two 13 mm open-end wrenches.

    • Use a little bucket to receive the water from the water lines.

  5. Filter Housing Replacement for GE Refrigerators model GSS25KSW / GSF25KGW: 步骤 5 中的图像 1,1
    • Disconnect the water line from the water inlet valve using and open-end wrench size 15mm

  6. Filter Housing Replacement for GE Refrigerators model GSS25KSW / GSF25KGW: 步骤 6 中的图像 1,2 Filter Housing Replacement for GE Refrigerators model GSS25KSW / GSF25KGW: 步骤 6 中的图像 2,2
    • Disconnect the water line cover removing 2 screws using a 7 mm nut driver.

    • Pull up the gum seal compound.

  7. Filter Housing Replacement for GE Refrigerators model GSS25KSW / GSF25KGW: 步骤 7 中的图像 1,1
    • Push the left side of the filter cover and pull it straight out.

  8. Filter Housing Replacement for GE Refrigerators model GSS25KSW / GSF25KGW: 步骤 8 中的图像 1,2 Filter Housing Replacement for GE Refrigerators model GSS25KSW / GSF25KGW: 步骤 8 中的图像 2,2
    • Remove the 2 screws on top of the housing using 7 mm nut driver.

    • Pull the housing and filter out slowly.

    • Remove the filter by turn it counterclockwise

结论

To reassemble your device, follow these instructions in reverse order.

Giancarlo Marruffo

于2016年09月18日注册

2 声望

撰写一个指南

团队

Pasco Hernando, Team 5-1, Prince Fall 2016 Pasco Hernando, Team 5-1, Prince Fall 2016 的会员

PHSC-PRINCE-F16S5G1

1 名成员

创作了1篇指南

0条评论

添加评论

浏览统计数据:

过去 24 小时: 2

过去 7 天: 4

过去 30 天: 29

总计 1,445