跳转到主内容

Fahrenheit FHT 125PRMR Power Cord Replacement

你所需要的

  1. Fahrenheit FHT 125PRMR Power Cord Replacement, Power Cord: 步骤 1 中的图像 1,1
    • Use your fingers or a plastic opening tool to open the side hinges on both sides of the device.

  2. Fahrenheit FHT 125PRMR Power Cord Replacement: 步骤 2 中的图像 1,1
    • Using a Philips head #2 screwdriver remove the 7mm black screw from the hinge of the device.

  3. Fahrenheit FHT 125PRMR Power Cord Replacement: 步骤 3 中的图像 1,2 Fahrenheit FHT 125PRMR Power Cord Replacement: 步骤 3 中的图像 2,2
    • Using the metal spudger, push through the hole the screw was removed from. Doing this will push the copper pin out of the other side.

    • When the pin is removed the two sides of the device can now separate.

    • Be sure to collect the spring that is next to the hinge when they are separated.

  4. Fahrenheit FHT 125PRMR Power Cord Replacement: 步骤 4 中的图像 1,2 Fahrenheit FHT 125PRMR Power Cord Replacement: 步骤 4 中的图像 2,2
    • Use the Phillips Head 1 screwdriver to remove the two screws on the back where the power cable exits the device.

    • Once the two screws are removed; simply lift the case up and off to have access to the power cable.

  5. Fahrenheit FHT 125PRMR Power Cord Replacement: 步骤 5 中的图像 1,1
    • To remove the power cable, grab the clear plastic holding and the base of the power cable and pull apart.

结论

To reassemble your device, follow these instructions in reverse order.

4等其他人完成本指南。

Joshua Potts

于09/29/16注册

265 声望

撰写一个指南

团队

IUPUI, Team 2-2, Harley Fall 2016 IUPUI, Team 2-2, Harley Fall 2016 的会员

IUPUI-HARLEY-F16S2G2

4 名成员

创作了4篇指南

3条评论

Where do I find a new power cord? I've tried searching everywhere.

tmbrand04 - 回复

Where do you buy the power cord?

Dominique - 回复

probably available at electronic store

john john - 回复

添加评论

浏览统计数据:

过去 24 小时: 0

过去 7 天: 2

过去 30 天: 9

总计 2,452