跳转到主内容

修复你的物品

维修的权力

配件 & 工具

简介

This guide shows you step by step, how to replace the heating plates for the Fahrenheit FHT 125PRMR hair straightener that are not working when powered on. Please make sure that the device (Fahrenheit FHT 125PRMR), is unplugged when working on it, to avoid damaging any electrical components and harming yourself.

  1. Use your fingers or a plastic opening tool to open the side hinges on both sides of the device.
    • Use your fingers or a plastic opening tool to open the side hinges on both sides of the device.

  2. Using a Philips head #2 screwdriver remove the 7mm black screw from the hinge of the device.
    • Using a Philips head #2 screwdriver remove the 7mm black screw from the hinge of the device.

  3. Using the metal spudger, push through the hole the screw was removed from.  Doing this will push the copper pin out of the other side. When the pin is removed the two sides of the device can now separate.
    • Using the metal spudger, push through the hole the screw was removed from. Doing this will push the copper pin out of the other side.

    • When the pin is removed the two sides of the device can now separate.

    • Be sure to collect the spring that is next to the hinge when they are separated.

  4. Using Philips head (PH1) remove the 6 mm black screw that was underneath the spring as well as the 6 mm black screw next to the heating plate. Remove the panel the screws were holding down.
    • Using Philips head (PH1) remove the 6 mm black screw that was underneath the spring as well as the 6 mm black screw next to the heating plate. Remove the panel the screws were holding down.

  5. 任天堂 Switch 套装

    快速恢复到游戏的状态

    购买 Switch 套装

    任天堂 Switch 套装

    快速恢复到游戏的状态

    购买 Switch 套装
  6. Using Philips head (PH1) remove the two 4 mm silver screws on the sides of dial panel cover
    • Using Philips head (PH1) remove the two 4 mm silver screws on the sides of dial panel cover

  7. Using Philips head (PH00) to remove the 4 mm silver screw on the dial. Remove the dial with your hand. Using Philips head (PH00) to remove the 4 mm silver screw on the dial. Remove the dial with your hand.
    • Using Philips head (PH00) to remove the 4 mm silver screw on the dial. Remove the dial with your hand.

  8. Remove the covering panel by pulling up with your hand.
    • Remove the covering panel by pulling up with your hand.

  9. Desolder the 4 white wires to remove the heating plate on the motherboard side.
  10. Remove 3 sliver screws (3mm) (PH1) from the motherboard. Remove 3 sliver screws (3mm) (PH1) from the motherboard.
    • Remove 3 sliver screws (3mm) (PH1) from the motherboard.

  11. Desolder the 2 white cables to remove the heating plate on the side of the iron without the motherboard.
    • Desolder the 2 white cables to remove the heating plate on the side of the iron without the motherboard.

    • 如何焊接和拆焊

结论

To reassemble your device, follow these instructions in reverse order.

Omar El Mounayri

于2016年09月29日注册

61 信誉积分

撰写一个指南

团队

IUPUI, Team 2-2, Harley Fall 2016 IUPUI, Team 2-2, Harley Fall 2016 的会员

IUPUI-HARLEY-F16S2G2

4 名成员

创作了4篇指南

添加评论

浏览统计数据:

过去的24小时: 0

过去的7天: 1

过去的30天: 10

总计 1,524