修复你的物品 社区 商店

Eureka SuctionSeal 2.0 Pet Filters Replacement

简介

This guide walks you through removing the exhaust and dust cup filters in the Eureka SuctionSeal 2.0 Pet vacuum. Refer to this guide if you notice a bad smell coming from your vacuum or you are experiencing poor suction.

  1. Eureka SuctionSeal 2.0 Pet Filters Replacement, Dust Cup: 步骤 1 中的图像 1，2 Eureka SuctionSeal 2.0 Pet Filters Replacement, Dust Cup: 步骤 1 中的图像 2，2

    • Place the device upright with the brush roller closest to you.

    • Pull up on the latch at the top of the dust cup.

    • Tilt the top of the dust cup forward and pull towards yourself, removing the container from the device.

    编辑

  2. Eureka SuctionSeal 2.0 Pet Filters Replacement, Filters: 步骤 2 中的图像 1，2 Eureka SuctionSeal 2.0 Pet Filters Replacement, Filters: 步骤 2 中的图像 2，2

    • Locate the gray exhaust filter cover at the top of the vacuum's base.

    • Grip the two tabs in the middle of the filter cover and rotate it counter-clockwise.

    • Lift the cover away from the vacuum.

    编辑

  4. Eureka SuctionSeal 2.0 Pet Filters Replacement: 步骤 3 中的图像 1，1

    • Grab the tab on the exhaust filter.

    • Lift the filter straight up from the vacuum's base.

    编辑

  5. Eureka SuctionSeal 2.0 Pet Filters Replacement: 步骤 4 中的图像 1，2 Eureka SuctionSeal 2.0 Pet Filters Replacement: 步骤 4 中的图像 2，2

    • Locate the lid at the top of the previously removed dust cup.

    • Lift the latch and lay the cover back.

    编辑

  6. Eureka SuctionSeal 2.0 Pet Filters Replacement: 步骤 5 中的图像 1，2 Eureka SuctionSeal 2.0 Pet Filters Replacement: 步骤 5 中的图像 2，2

    • Pull up on the tag and remove the filter.

    编辑
结论

To reassemble your device, follow these instructions in reverse order.

作者

与3其他贡献者

Anna Snyder

于10/02/17注册

336 声望

创作了3篇指南

徽章: 11

+ 8更多徽章

团队

Cal Poly, Team S4-G5, Livingston Fall 2017 Cal Poly, Team S4-G5, Livingston Fall 2017 的会员

CPSU-LIVINGSTON-F17S4G5

3 名成员

创作了16篇指南

0条评论

添加评论

浏览统计数据:

过去 24 小时： 0

过去 7 天： 3

过去 30 天： 6

总计 582