跳转到主内容

修复你的物品

维修的权力

商店

简介

Replace the small wheel or 'roller' on the bottom of the Eureka.

  1. Press the black separator switch and lightly pull the bottom half away from the top. Press the black separator switch and lightly pull the bottom half away from the top.
    • Press the black separator switch and lightly pull the bottom half away from the top.

  2. Remove the vacuum head from the lower half of the body. Remove the vacuum head from the lower half of the body.
    • Remove the vacuum head from the lower half of the body.

  3. 跳过升级

    通过使用多合一工具包维修可以节省成本。

    购买 iPhone 维修工具套装

    跳过升级

    通过使用多合一工具包维修可以节省成本。

    购买 iPhone 维修工具套装
  4. Turn the vacuum head wheels up and remove all seven 13.9mm screws from the bottom using a #2 Phillips head screwdriver. Separate the top and bottom of the vacuum head. Set the top aside. Separate the top and bottom of the vacuum head. Set the top aside.
    • Turn the vacuum head wheels up and remove all seven 13.9mm screws from the bottom using a #2 Phillips head screwdriver.

    • Separate the top and bottom of the vacuum head. Set the top aside.

  5. Turn the vacuum head's bottom over so that the inside of the head is facing up. Using a Phillips #00 screwdriver, press down on metal bar of the roller on one side until it releases from the housing.
    • Turn the vacuum head's bottom over so that the inside of the head is facing up.

    • Using a Phillips #00 screwdriver, press down on metal bar of the roller on one side until it releases from the housing.

    • Turn the vacuum head's bottom over and pull at the roller and bar until they are completely out of the housing.

  6. Press the new bar and roller into place.
    • Press the new bar and roller into place.

    • Replace the screws.

终点

Jennifer Sheils

于2013年09月07日注册

4 信誉积分

创作了2篇指南

团队

UMass Dartmouth, Team 1-1, Gulbrandsen Fall 2013 UMass Dartmouth, Team 1-1, Gulbrandsen Fall 2013 的会员

UMASSD-GULBRANDSEN-F13S1G1

3 名成员

创作了6篇指南

添加评论

浏览统计数据:

过去的24小时: 0

过去的7天: 0

过去的30天: 0

总计 142