Eufy RoboVac 11S Filters Replacement

简介

Eufy RoboVac 11S won’t work very efficiently when there’s too much dust in the filter. Instead of buying a new vacuum, you can replace some accessories to bring life back to your vacuum robot. This guide shows how to replace the foam filter and high-performance filter in the dust collector.

你所需要的

步骤 1 Filters

Eufy RoboVac 11S Filters Replacement, Filters: 步骤 1 中的图像 1，2

Eufy RoboVac 11S Filters Replacement, Filters: 步骤 1 中的图像 2，2

Press the dust collector release button.
Pull the dust collector out.

编辑

步骤 2

Push the blue button up and open the dust collector.
Empty the dust collector, and throw all the dust into the trash bin.

编辑

步骤 3

Eufy RoboVac 11S Filters Replacement: 步骤 3 中的图像 3，3

Pull the hooks up to take out the pre-filter.
Pull the filter lightly because the hook by the filter is easy to break.

编辑

步骤 4

Eufy RoboVac 11S Filters Replacement: 步骤 4 中的图像 3，3

Take out the high-performance filter to the side and use a cleaning brush to clean the filter.
Take out the foam filter to the side and dispose of it in the trash bin.

编辑

步骤 5

Use the cleaning brush to sweep the dust from the pre-filter.

编辑

步骤 6

Put the pre-filter back in the dust collector.
Use your finger to push the top button first.
Push the filter lightly because the hook by the filter is easy to break.

编辑

步骤 7

Open the back of the dust collector.
Replace the white foam filter.
Put the black high-performance filter at the top of the foam filter.
Make sure to put the foam filter before the high-performance filter, otherwise the robot will have problems cleaning.