跳转到主内容

修复你的物品

维修的权力

配件 & 工具

简介

This guide details how to open the Eton FRX3 case, to preform repair tasks on its internals.

  1. Pull the plastic tab on the battery compartment cover panel to loosen it, then pull the panel off.
    • Pull the plastic tab on the battery compartment cover panel to loosen it, then pull the panel off.

  2. Disconnect the battery pack wires from the device and remove the battery pack.
    • Disconnect the battery pack wires from the device and remove the battery pack.

  3. On the bottom of the device case's face are two T10 screws. Use a T10 Torx screwdriver to remove the two screws.
    • On the bottom of the device case's face are two T10 screws. Use a T10 Torx screwdriver to remove the two screws.

  4. 任天堂 Switch 套装

    快速恢复到游戏的状态

    购买 Switch 套装

    任天堂 Switch 套装

    快速恢复到游戏的状态

    购买 Switch 套装
  5. While using the T10 screwdriver, remove the two T10 screws on the back of the device's case.
    • While using the T10 screwdriver, remove the two T10 screws on the back of the device's case.

  6. Remove the two Phillips #00 screws located in the center of the back of the device.
    • Remove the two Phillips #00 screws located in the center of the back of the device.

    • You will need to use a thin shafted screwdriver or a female hexagonal bit that is found in the iFixit 54 bit toolkit to extend the reach of the Phillips #00 bit.

  7. On the bottom of the device's case there are two rubber feet. Pry the rubber feet off of the case.
    • On the bottom of the device's case there are two rubber feet. Pry the rubber feet off of the case.

    • Try to keep the adhesive on the rubber feet as clean as possible to insure that they can be reattached during reassembly.

  8. Pull the two halves of the device's case apart.
    • Pull the two halves of the device's case apart.

    • Take care when pulling the two halves apart. There are three cables that connect components of the device to the motherboard. Disconnect these cables in order to separate the two halves of the device's case.

结论

To reassemble your device, follow these instructions in the reverse order.

zakk

于2013年11月29日注册

1,919 信誉积分

创作了2篇指南

团队

Master Techs Master Techs 的会员

Community

294 名成员

创作了943篇指南

添加评论

浏览统计数据:

过去的24小时: 0

过去的7天: 0

过去的30天: 1

总计 196