跳转到主内容

Etekcity Lasergrip 1080 Button Replacement

你所需要的

  1. Etekcity Lasergrip 1080 Button Replacement, Battery: 步骤 1 中的图像 1,1
    • Pull the battery cover away from the handle by gripping near the thumb groove.

  2. Etekcity Lasergrip 1080 Button Replacement: 步骤 2 中的图像 1,1
    • Gently pull the battery out of the handle.

    • Excessive force could damage wires.

  3. Etekcity Lasergrip 1080 Button Replacement: 步骤 3 中的图像 1,2 Etekcity Lasergrip 1080 Button Replacement: 步骤 3 中的图像 2,2
    • Disconnect the battery by pulling the connector away from it.

    • Positive first

    • Negative second

    • When replacing the battery, this order is reversed.

  4. Etekcity Lasergrip 1080 Button Replacement, Buttons: 步骤 4 中的图像 1,2 Etekcity Lasergrip 1080 Button Replacement, Buttons: 步骤 4 中的图像 2,2
    • Remove the battery cover from the device by pulling it straight out.

  5. Etekcity Lasergrip 1080 Button Replacement: 步骤 5 中的图像 1,2 Etekcity Lasergrip 1080 Button Replacement: 步骤 5 中的图像 2,2
    • Using the plastic opening tool remove the front and rear yellow covers.

    • When removing the back cover, be careful not to lose the buttons as they are not connected.

  6. Etekcity Lasergrip 1080 Button Replacement: 步骤 6 中的图像 1,1
    • Remove the two 3.1 mm Phillips #0 screws.

  7. Etekcity Lasergrip 1080 Button Replacement: 步骤 7 中的图像 1,2 Etekcity Lasergrip 1080 Button Replacement: 步骤 7 中的图像 2,2
    • Pull the two halves apart.

    • Be careful not to lose any components on the inside.

  8. Etekcity Lasergrip 1080 Button Replacement: 步骤 8 中的图像 1,1
    • Realign the buttons with the button terminals.

    • Red terminal to red button.

    • Orange terminal to orange button.

    • Yellow terminal to yellow button.

结论

To reassemble your device, follow these instructions in reverse order.

团队

USF Tampa, Team 5-1, Blackwell Fall 2015 USF Tampa, Team 5-1, Blackwell Fall 2015 的会员

USFT-BLACKWELL-F15S5G1

3 名成员

创作了9篇指南

0条评论

添加评论

浏览统计数据:

过去 24 小时: 0

过去 7 天: 3

过去 30 天: 5

总计 454