跳转到主内容

Epson Stylus Photo 1400 Housing Replacement

你所需要的

  1. Epson Stylus Photo 1400 Housing Replacement, Housing: 步骤 1 中的图像 1,1
    • Turn off the printer.

    • Disconnect all data connections coming into the printer such as USB, networkd cables, firewire, etc. as well as removing the power cord.

  2. Epson Stylus Photo 1400 Housing Replacement: 步骤 2 中的图像 1,2 Epson Stylus Photo 1400 Housing Replacement: 步骤 2 中的图像 2,2
    • Locate the IEEE cover in the back.

    • Gently slide the cover to the right to unlatch, then pull to remove it.

  3. Epson Stylus Photo 1400 Housing Replacement: 步骤 3 中的图像 1,2 Epson Stylus Photo 1400 Housing Replacement: 步骤 3 中的图像 2,2
    • Using a Phillips #2 screwdriver, remove the four 10 mm screws shown.

    • Remove the 6 mm screw that holds the rear housing in place.

  4. Epson Stylus Photo 1400 Housing Replacement: 步骤 4 中的图像 1,2 Epson Stylus Photo 1400 Housing Replacement: 步骤 4 中的图像 2,2
    • Remove the rear housing by pulling it backwards.

  5. Epson Stylus Photo 1400 Housing Replacement: 步骤 5 中的图像 1,3 Epson Stylus Photo 1400 Housing Replacement: 步骤 5 中的图像 2,3 Epson Stylus Photo 1400 Housing Replacement: 步骤 5 中的图像 3,3
    • Insert a plastic opening tool into the cutouts of the lower housing.

    • Release the two tabs of the side housing by lifting the tool in an upward motion.

    • Remove the side housing by pulling it outwards.

  6. Epson Stylus Photo 1400 Housing Replacement: 步骤 6 中的图像 1,2 Epson Stylus Photo 1400 Housing Replacement: 步骤 6 中的图像 2,2
    • Both side housings are attached by the same type of mechanism.

    • Using the same method, remove the other side housing.

  7. Epson Stylus Photo 1400 Housing Replacement: 步骤 7 中的图像 1,3 Epson Stylus Photo 1400 Housing Replacement: 步骤 7 中的图像 2,3 Epson Stylus Photo 1400 Housing Replacement: 步骤 7 中的图像 3,3
    • Lift the paper support.

    • Open the printer cover and front cover.

  8. Epson Stylus Photo 1400 Housing Replacement: 步骤 8 中的图像 1,3 Epson Stylus Photo 1400 Housing Replacement: 步骤 8 中的图像 2,3 Epson Stylus Photo 1400 Housing Replacement: 步骤 8 中的图像 3,3
    • Remove the four 10 mm Phillips #2 screws from the sides of the printer.

    • Remove the three 6 mm Phillips #2 screws.

  9. Epson Stylus Photo 1400 Housing Replacement: 步骤 9 中的图像 1,2 Epson Stylus Photo 1400 Housing Replacement: 步骤 9 中的图像 2,2
    • Detach the tabs from the pins on each side by pulling it outwards.

  10. Epson Stylus Photo 1400 Housing Replacement: 步骤 10 中的图像 1,2 Epson Stylus Photo 1400 Housing Replacement: 步骤 10 中的图像 2,2
    • Remove the two 10 mm Phillips #2 screws on the front of the printer.

  11. Epson Stylus Photo 1400 Housing Replacement: 步骤 11 中的图像 1,3 Epson Stylus Photo 1400 Housing Replacement: 步骤 11 中的图像 2,3 Epson Stylus Photo 1400 Housing Replacement: 步骤 11 中的图像 3,3
    • Disconnect the two cables on the side by carefully pulling it outwards.

    • You may need to gently rock the two cables up and down while pulling.

  12. Epson Stylus Photo 1400 Housing Replacement: 步骤 12 中的图像 1,2 Epson Stylus Photo 1400 Housing Replacement: 步骤 12 中的图像 2,2
    • Remove the upper housing by lifting it upwards.

    • It's easier to lift the housing by gripping it from the bottom.

结论

To reassemble your device, follow these instructions in reverse order.

10等其他人完成本指南。

Larry Huang

于10/12/11注册

1,004 声望

创作了4篇指南

团队

Cal Poly, Team 17-11, Regan Fall 2011 Cal Poly, Team 17-11, Regan Fall 2011 的会员

CPSU-REGAN-F11S17G11

4 名成员

创作了12篇指南

一条评论

Thank you so much, Larry! I am repurposing my 1400 for sublimation printing and need to get the print head a little easier than standard methods! Much appreciated!

ryan Caputo - 回复

添加评论

浏览统计数据:

过去 24 小时: 1

过去 7 天: 5

过去 30 天: 22

总计 7,527