Epson Stylus NX230 Motor Replacement

简介

The motor of the printer supplies the motion to the papers as they are fed into the machine and then out of the machine with the newly printed material. The motor may stop functioning due to damage or faulty wiring, preventing the printing of any documents.

你所需要的

步骤 1 Motherboard

Epson Stylus NX230 Motor Replacement, Motherboard: 步骤 1 中的图像 1，1

Check to make sure the printer is unplugged to prevent electric shock.

翻译

步骤 2

Align your printer so that the front buttons face to the right.
Remove the 3mm Phillips #2 screw in the hole in the top left corner. This screw attaches the side panel to the printer.
Store the screws in a safe place so you can access them later.

翻译

步骤 3

Flip and remove the top of the printer up so that you can see the inside.
There is a white strip in the top right corner of the printer called the ribbon cable.
Make sure that the ribbon cable does not detach from the printer to prevent damaging the connection.

翻译

步骤 4

Align the printer so the front button panel faces to the right.
Remove the 3mm Phillips #2 screw on the side of the printer in the top left corner.
Store the screw in a safe place so you can access it later.

翻译

步骤 5

Take the right side of the bar of plastic that runs across the top of the inside of the printer and push it towards the left side of the printer.
Take the left side of the bar and push it to the left and then to the right.

翻译

步骤 6

Epson Stylus NX230 Motor Replacement: 步骤 6 中的图像 3，3

Using your hands, detach the side panel from the printer.
Take extra care with the locking mechanisms, which help keep the side panel on the printer.
You may need to use the plastic opening tools to pry apart the locking mechanisms.