跳转到主内容

Envizen V100M Speakers Replacement

你所需要的

  1. Envizen V100M Speakers Replacement, Back Cover: 步骤 1 中的图像 1,2 Envizen V100M Speakers Replacement, Back Cover: 步骤 1 中的图像 2,2
    • Remove the two screws on the side of the tablet that hold the back cover in place using the ifixit PH00 screwdriver.

    • The two screws for the back cover are: 1.5mm diameter x 3.5mm long

  2. Envizen V100M Speakers Replacement: 步骤 2 中的图像 1,3 Envizen V100M Speakers Replacement: 步骤 2 中的图像 2,3 Envizen V100M Speakers Replacement: 步骤 2 中的图像 3,3
    • Pry along the edge of the device to separate the back cover from the device.

    • The speakers are attached to the back cover and motherboard assembly so remove carefully.

  3. Envizen V100M Speakers Replacement, Speakers: 步骤 3 中的图像 1,1
    • Check to see if the wires of the speakers are connected to the motherboard assembly here.

  4. Envizen V100M Speakers Replacement: 步骤 4 中的图像 1,1
    • take the wires of one of the speakers and solder them back on the mother board, as shown. Remember, Red is always positive (+) and Black is always negative (-). here is a guide on how to solder.

  5. Envizen V100M Speakers Replacement: 步骤 5 中的图像 1,1
    • Repeat the same process for the second speaker. The other set of terminals for the second speaker is directly next to the first set.

结论

To reassemble your device, follow these instructions in reverse order.

nbach

于03/23/15注册

663 声望

创作了6篇指南

团队

UMass Dartmouth, Team 3-2, Duarte Spring 2015 UMass Dartmouth, Team 3-2, Duarte Spring 2015 的会员

UMASSD-DUARTE-S15S3G2

4 名成员

创作了12篇指南

0条评论

添加评论

浏览统计数据:

过去 24 小时: 0

过去 7 天: 0

过去 30 天: 5

总计 119