修复你的物品 社区 商店

Eleaf iJust 3 Disassembly

简介

iJust 3 is third edition in the series of iJust’s. It’s well known among users all around the world. During using it you can encounter most common problem - putrescent fire button.

你所需要的

  1. Eleaf iJust 3 Disassembly, Eleaf iJust 3 Teardown: 步骤 1 中的图像 1，1

    • Specification of iJust 3:

    • Resistance range: 0.1 Ohm - 3.0 Ohm

    • Battery voltage: 3.7V

    • Max power: 80W

    编辑

  2. Eleaf iJust 3 Disassembly: 步骤 2 中的图像 1，2 Eleaf iJust 3 Disassembly: 步骤 2 中的图像 2，2

    • Insert stick into vice (attach it to the top part) and slowly pull up by "tube part"

    • Be carefull! If you will pull it too fast and too strong, you can break away battery

    编辑

  4. Eleaf iJust 3 Disassembly: 步骤 3 中的图像 1，1

    • Unscrew two screws on the sides of board.

    编辑

  5. Eleaf iJust 3 Disassembly: 步骤 4 中的图像 1，1

    • Thats all, thanks for your attention

    编辑
终点

5等其他人完成本指南。

2条评论

It was very helpful, thank you!

kali1902 - 回复

I don’t think Ifixit should be hosting repair guides for products that can damage your health.

guardian10 - 回复

添加评论

浏览统计数据:

过去 24 小时： 0

过去 7 天： 10

过去 30 天： 46

总计 4,925