修复你的物品 社区 商店

Eightarc Fusion Logic Board Replacement

你所需要的

  1. Eightarc Fusion Logic Board Replacement, Logic Board: 步骤 1 中的图像 1，2 Eightarc Fusion Logic Board Replacement, Logic Board: 步骤 1 中的图像 2，2

    • Because of the protruding joystick on the top of the controller, make sure to work on a soft surface or prop the controller up to avoid stress on the joystick.

    • Place the controller face down (buttons and joystick down).

    • Use a Phillips Head #1 screwdriver to remove the eight 9.65mm screws located on the felt and metal backplate.

    • Do not confuse the four screws in the rubber feet with the eight screws in the felt. The screws in the feet do not need to be removed.

    翻译

  2. Eightarc Fusion Logic Board Replacement: 步骤 2 中的图像 1，1

    • Open the door for the cord storage compartment on the right side of the device.

    • Reach under the panel and push upwards on the back panel. Lift it up and remove it from the device.

    翻译

  4. Eightarc Fusion Logic Board Replacement: 步骤 3 中的图像 1，3 Eightarc Fusion Logic Board Replacement: 步骤 3 中的图像 2，3 Eightarc Fusion Logic Board Replacement: 步骤 3 中的图像 3，3

    • Make sure not to flex the logic board when removing ribbon cables.

    • Individually remove the seven cable connectors plugged into the logic board by grasping each white plug and gently pulling upwards.

    翻译

  5. Eightarc Fusion Logic Board Replacement: 步骤 4 中的图像 1，1

    • Use a Phillips Head #1 screwdriver to remove the two 7.15mm washer head screws from logic board.

    翻译

  6. Eightarc Fusion Logic Board Replacement: 步骤 5 中的图像 1，1

    • Gently lift off logic board up to remove from the device.

    翻译
结论

To reassemble your device, follow these instructions in reverse order.

作者

与1其他贡献者

Chandler Stalford

于02/04/15注册

101 声望

撰写一个指南

徽章: 3

团队

Cal Poly, Team 17-35, Amido Winter 2015 Cal Poly, Team 17-35, Amido Winter 2015 的会员

CPSU-AMIDO-W15S17G35

4 名成员

创作了5篇指南

0条评论

添加评论

浏览统计数据:

过去 24 小时： 0

过去 7 天： 4

过去 30 天： 6

总计 412