Edwin the Duck Rubber Gasket Seal Replacement

简介

The motherboard compartment is the central identity of the duck and if water gets inside of it, Edwin will no longer work. With this guide, we are going to help you through the steps of replacing the rubber gasket seal, which prevents water from entering the motherboard compartment of Edwin.

你所需要的

步骤 1 Rubber Gasket Seal

Edwin the Duck Rubber Gasket Seal Replacement, Rubber Gasket Seal: 步骤 1 中的图像 1，2

Edwin the Duck Rubber Gasket Seal Replacement, Rubber Gasket Seal: 步骤 1 中的图像 2，2

Unscrew the four 9mm screws with aT8 bit
Take the back plate off

编辑

步骤 2

Carefully take off the rubber skin.
Be patient and don't rush. You don't want to rip or damage the rubber skin otherwise you will lose the waterproof cover.

编辑

步骤 3

Using the J1 bit, unscrew all six 9 mm screws around the border.

编辑

步骤 4

Use the plastic opening tool to open the inside of the duck.
Be very careful when splitting the two halves apart. There are wires connecting to both sides. So open it very slowly.