跳转到主内容

Edwin the Duck Motherboard Replacement

你所需要的

  1. Edwin the Duck Motherboard Replacement, Motherboard: 步骤 1 中的图像 1,2 Edwin the Duck Motherboard Replacement, Motherboard: 步骤 1 中的图像 2,2
    • Unscrew the four 9mm screws with a T8 screwdriver bit

    • Remove the back plate off

  2. Edwin the Duck Motherboard Replacement: 步骤 2 中的图像 1,2 Edwin the Duck Motherboard Replacement: 步骤 2 中的图像 2,2
    • Carefully take off the rubber skin.

    • Be patient and don't rush. You don't want to rip or damage the rubber skin resulting in losing the waterproof cover.

  3. Edwin the Duck Motherboard Replacement: 步骤 3 中的图像 1,1
    • Using the J1 screwdriver bit, unscrew all six 9 mm screws that run along the border.

  4. Edwin the Duck Motherboard Replacement: 步骤 4 中的图像 1,2 Edwin the Duck Motherboard Replacement: 步骤 4 中的图像 2,2
    • Use the plastic opening tool to open the inside of the duck.

    • Be very careful when splitting the two halves apart. There are wires connecting to both sides. Remember to open slowly.

  5. Edwin the Duck Motherboard Replacement: 步骤 5 中的图像 1,2 Edwin the Duck Motherboard Replacement: 步骤 5 中的图像 2,2
    • Using the plastic opening tool pull up the black tab up until it stops.

    • Be careful not to pull up the black tab too far up, otherwise the cable won't be secure anymore.

    • Pull up the white cable tab, up slowly

  6. Edwin the Duck Motherboard Replacement: 步骤 6 中的图像 1,1
    • Use the J1 screwdriver bit to unscrew all four 9 mm screws attached to the motherboard.

  7. Edwin the Duck Motherboard Replacement: 步骤 7 中的图像 1,1
    • Remove the top connector as you see in the picture.

    • Replace the new motherboard and you are finished.

结论

To reassemble your device, follow these instructions in reverse order.

另外一个人完成了本指南。

Caleb Kim

于10/18/17注册

143 声望

撰写一个指南

团队

UW Tacoma, Team S1-G4, Rose Fall 2017 UW Tacoma, Team S1-G4, Rose Fall 2017 的会员

UWT-ROSE-F17S1G4

4 名成员

创作了8篇指南

0条评论

添加评论

浏览统计数据:

过去 24 小时: 0

过去 7 天: 0

过去 30 天: 2

总计 392