修复你的物品 社区 商店

Ecovacs Deebot 900 Front Bumper Replacement

简介

The front bumper of the Ecovacs Deebot 900 is used to sense obstacles in its path. A malfunctioning front bumper can cause the Deebot to move in a circular fashion. Use this guide to remove or replace the front bumper on your Ecovacs 900 Deebot.

你所需要的

  1. Ecovacs Deebot 900 Front Bumper Replacement, Battery: 步骤 1 中的图像 1，1

    • Remove all the brushes from the Deebot.

    翻译

  2. Ecovacs Deebot 900 Front Bumper Replacement: 步骤 2 中的图像 1，1

    • Using a Phillips #0 screwdriver, remove the two 12.25 mm screws holding the battery cover in place.​

    翻译

  3. Ecovacs Deebot 900 Front Bumper Replacement: 步骤 3 中的图像 1，1

    • Remove the battery cover.

    翻译

  5. Ecovacs Deebot 900 Front Bumper Replacement: 步骤 4 中的图像 1，1

    • Using the two white straps on the sides of the battery, gently remove the battery. ​

    • Be careful not to rip out the battery cable.

    翻译

  6. Ecovacs Deebot 900 Front Bumper Replacement: 步骤 5 中的图像 1，1

    • Carefully disconnect the battery cable by pulling near the connector at the bottom of the battery compartment.

    翻译

  7. Ecovacs Deebot 900 Front Bumper Replacement, Front Bumper: 步骤 6 中的图像 1，2 Ecovacs Deebot 900 Front Bumper Replacement, Front Bumper: 步骤 6 中的图像 2，2

    • Using a Phillips #00 screwdriver, remove the eight screws on the bottom edge of the bumper. ​

    翻译

  8. Ecovacs Deebot 900 Front Bumper Replacement: 步骤 7 中的图像 1，1

    • Remove the black strip on the bottom of the bumper.

    翻译

  9. Ecovacs Deebot 900 Front Bumper Replacement: 步骤 8 中的图像 1，2 Ecovacs Deebot 900 Front Bumper Replacement: 步骤 8 中的图像 2，2

    • Carefully lift up the bumper untill it pops out of place.​

    翻译

  10. Ecovacs Deebot 900 Front Bumper Replacement: 步骤 9 中的图像 1，2 Ecovacs Deebot 900 Front Bumper Replacement: 步骤 9 中的图像 2，2

    • Disconnect the two cables connecting the bumper to the body of the Deebot.

    • Remove the front bumper from the device.

    翻译
结论

To reassemble your device, follow these instructions in reverse order.

另外一个人完成了本指南。

一条评论

Where may I buy the front bumper assembly? I'm trying to replace one for a deebot 901 but the mfg tells me they don't see the part directly.

Chris Khacherian - 回复

添加评论

浏览统计数据:

过去 24 小时： 14

过去 7 天： 65

过去 30 天： 212

总计 9,758