跳转到主内容

Eclipse 180BL Battery Replacement

你所需要的

  1. Eclipse 180BL Battery Replacement, Battery: 步骤 1 中的图像 1,1
    • Remove the two screws located on the bottom of the device with a phillips head screw driver.

    • The two screws can be removed using the PH00 head from the iFixit repair toolkit.

    • Both screws are 1/8 inch in length.

    • The bottom cap will come off to reveal the inside main component.

  2. Eclipse 180BL Battery Replacement: 步骤 2 中的图像 1,2 Eclipse 180BL Battery Replacement: 步骤 2 中的图像 2,2
    • Remove the main inner component using Spudger, by pushing on the USB port. This will take some force.

    • Hold on the sides with your fingers, and push to release from the top.

  3. Eclipse 180BL Battery Replacement: 步骤 3 中的图像 1,3 Eclipse 180BL Battery Replacement: 步骤 3 中的图像 2,3 Eclipse 180BL Battery Replacement: 步骤 3 中的图像 3,3
    • The plastic LCD cover and the key pad will now be loose; they were held in place by the tension between the case and the internal main component.

    • Locate the large square pack with a black and red wire coming out of it, this is the battery.

    • Cut the red and black wires to remove the old battery.

  4. Eclipse 180BL Battery Replacement: 步骤 4 中的图像 1,1
    • To Replace, connect the two new lines ( red and black) between the new battery and the device.

    • You have successfully replaced the battery!

结论

To reassemble your device, follow these instructions in reverse order.

3等其他人完成本指南。

Thomas Schwarz

于09/07/15注册

499 声望

创作了3篇指南

团队

0条评论

添加评论

浏览统计数据:

过去 24 小时: 0

过去 7 天: 6

过去 30 天: 15

总计 1,329