修复你的物品 社区 商店

EVGA x17 Clicker Replacement

简介

This guide contains steps for replacing faulty clickers on the EVGA x17 gaming mouse. Malfunctioning clickers might be due to gunk buildup, broken parts, or faulty wiring. Follow this guide for instructions of how to replace them.

你所需要的

  1. EVGA x17 Clicker Replacement, Clicker: 步骤 1 中的图像 1，1

    • Remove the mouse skates to reveal 5 screws.

    编辑

  2. EVGA x17 Clicker Replacement: 步骤 2 中的图像 1，1

    • Use a Phillips head screwdriver to remove the 5 screws that secure the bottom panel.

    编辑

  3. EVGA x17 Clicker Replacement: 步骤 3 中的图像 1，1

    • Remove the weight chamber cover.

    编辑

  5. EVGA x17 Clicker Replacement: 步骤 4 中的图像 1，1

    • Slowly slide a spudger into and around the bottom of the panel, prying until a "popping" sound is heard.

    编辑

  6. EVGA x17 Clicker Replacement: 步骤 5 中的图像 1，2 EVGA x17 Clicker Replacement: 步骤 5 中的图像 2，2

    • Remove the 13 screws on the interior.

    • There are 2 Phillips truss-head tapping screws, large circular heads, and the 11 Phillips screws from the interior.

    编辑

  7. EVGA x17 Clicker Replacement: 步骤 6 中的图像 1，1

    • Carefully slide the middle section out.

    编辑

  8. EVGA x17 Clicker Replacement: 步骤 7 中的图像 1，1

    • Remove the two screws from each clicker.

    编辑

  9. EVGA x17 Clicker Replacement: 步骤 8 中的图像 1，1

    • Pop and slide out each clicker that needs to be replaced.

    • Clickers may need to be tugged forward in their slots to slide out.

    • Be extra careful removing clickers because the attachments are fragile.

    编辑
结论

To reassemble your device, follow these instructions in reverse order.

0条评论

添加评论

浏览统计数据:

过去 24 小时： 0

过去 7 天： 1

过去 30 天： 12

总计 102