修复你的物品 社区 商店

Dyson Supersonic HD03 Hairdryer Filter Replacement

简介

A hairdryer is commonly used in our daily life, sometimes users forgot how important cleaning your device is. This guide is mainly focused on replacing and cleaning the Dyson Supersonic HD03 hairdryer filter. Whenever users encounter operation failure or weird noises, there are high chances that the hairdryer’s filter is blocked with dust or hair. Cleaning your hairdryer filter will help you avoid operation failure and increase your device life span. This guide will show you how to clean and replace your filter.

For further detailed information, you can visit Dyson Official.

你所需要的

  1. Dyson Supersonic HD03 Hairdryer Filter Replacement, Filter: 步骤 1 中的图像 1，2 Dyson Supersonic HD03 Hairdryer Filter Replacement, Filter: 步骤 1 中的图像 2，2

    • Unplug the hairdryer to avoid further hazard.

    编辑

  2. Dyson Supersonic HD03 Hairdryer Filter Replacement: 步骤 2 中的图像 1，2 Dyson Supersonic HD03 Hairdryer Filter Replacement: 步骤 2 中的图像 2，2

    • Remove the dirty filter cage by twisting the filter towards the left.

    • The filter cage will be unlocked when the red dot matches the white thin circle.

    • Do not run your hairdryer without a filter cage.

    编辑

  4. Dyson Supersonic HD03 Hairdryer Filter Replacement: 步骤 3 中的图像 1，1

    • Soak the filter cage in dish soap and warm water for at least 30 minutes.

    • You can leave the filter in for multiple hours or overnight if it's especially dirty.

    编辑

    • Use the supplied filter cleaning brush or any other cleaning tool to vigorously scrub the soaked filter cage.

    • Be sure to remove all blockages.

    编辑

  6. Dyson Supersonic HD03 Hairdryer Filter Replacement: 步骤 5 中的图像 1，1

    • Rinse and dry your filter cage.

    • Check that the filter cage is clean by holding it up to the light - you should be able to see light through it. If you can't, repeat the previous step.

    编辑

  7. Dyson Supersonic HD03 Hairdryer Filter Replacement: 步骤 6 中的图像 1，2 Dyson Supersonic HD03 Hairdryer Filter Replacement: 步骤 6 中的图像 2，2

    • Insert the filter back into the filter cage and install the filter cage back onto the device.

    • The filter cage will be locked when the red dot matches the white filled circle.

    编辑
结论

To reassemble your device, follow these instructions in reverse order.

另外一个人完成了本指南。

作者

与2其他贡献者

Huan-Che Hsu

于09/18/21注册

192 声望

撰写一个指南

徽章: 4

+1个徽章

团队

York University, Team F-14, Woodhouse Fall 2021 York University, Team F-14, Woodhouse Fall 2021 的会员

YORK-WOODHOUSE-F21SFG14

1 名成员

创作了1篇指南

一条评论

My Dyson hair dryer has quitting every 30 seconds - apparently overheating. It was very easy to remove the filter cage and wipe the filter clean. Problem solved!

Jimjar - 回复

添加评论

浏览统计数据:

过去 24 小时： 3

过去 7 天： 18

过去 30 天： 61

总计 4,067