跳转到主内容

简介

This guide will show you how to open and replace the bin of your Dyson DC58.

  1. Make sure your vacuum is unplugged.
    • Make sure your vacuum is unplugged.

    • Avoid pressing the red trigger on the vacuum handle; this will power on the vacuum.

  2. Locate the red lever parallel to the red trigger and on the side of the clear bin.
    • Locate the red lever parallel to the red trigger and on the side of the clear bin.

  3. Push the red lever downward to open the clear bin. You may need to do this over a trash bin if there is debris in the clear bin.
    • Push the red lever downward to open the clear bin. You may need to do this over a trash bin if there is debris in the clear bin.

  4. Push the red lever downward again while pulling the clear bin away from the main body of the Dyson vacuum. Push the red lever downward again while pulling the clear bin away from the main body of the Dyson vacuum.
    • Push the red lever downward again while pulling the clear bin away from the main body of the Dyson vacuum.

结论

To reassemble your device, follow these instructions in reverse order.

3等其他人完成本指南。

Ian Sloan

于2015年09月17日注册

161 信誉积分

撰写一个指南

团队

CSU Fullerton, Team 2-4, Bruce Fall 2015 CSU Fullerton, Team 2-4, Bruce Fall 2015 的会员

CSUF-BRUCE-F15S2G4

4 名成员

创作了12篇指南

The bin is stuck and won’t come off, although I have followed the directions above.

Marcy Altimano - 回复

I think the reassembly instructions should be numbered “Step 5” and printed right below Step 4. They aren’t that easy to see.

Mary Miraglia - 回复

添加评论

浏览统计数据:

过去的24小时: 2

过去的7天: 22

过去的30天: 137

总计 9,778