Dyson DC56 Motor Replacement

简介

The motor is the most important part of the DC56. If the vacuum stops working completely you could need to replace the motor.

你所需要的

步骤 1 Battery

Dyson DC56 Motor Replacement, Battery: 步骤 1 中的图像 1，1

Make sure the vacuum is unplugged from charger.
Warning: Avoid pressing red trigger because the vacuum will turn on the device and begin suction.

翻译

步骤 2

Locate the purple button at the top of the device.

翻译

步骤 3

Separate the device with the purple button.

翻译

步骤 4

Take out the filter.

翻译

步骤 5

Locate and remove the 10mm Phillips head screw using a Phillips #1 screw driver.

翻译

步骤 6 Battery screw 2

Dyson DC56 Motor Replacement, Battery screw 2: 步骤 6 中的图像 1，1

Locate and remove #000 25mm phillips screw on the reverse side of the vacuum

翻译

步骤 7

Pull the battery pack down and away from the main body and remove it from the device.

翻译

步骤 8 Motor

Dyson DC56 Motor Replacement, Motor: 步骤 8 中的图像 1，1

Take out the 10mm screw using a Phillips #1 screwdriver.

翻译

步骤 9

Use a spudger to separate the back plate covering the motor.
Be careful when trying to remove the motor with a metal spudger. Be sure your battery is removed before trying to fully remove the motor.

翻译

步骤 10

Use a flat spudger to loosen and remove the motor out of the vacuum.

翻译

结论

To reassemble your device, follow these instructions in reverse order.

2等其他人完成本指南。

作者

与4其他贡献者

John Czerkawski

于10/02/17注册

427 声望

创作了4篇指南

徽章: 7

+ 4更多徽章

团队

USF Tampa, Team S10-G1, Thompson Fall 2017 USF Tampa, Team S10-G1, Thompson Fall 2017 的会员

USFT-THOMPSON-F17S10G1

4 名成员

创作了11篇指南

Dyson DC56 Motor Replacement

简介

你所需要的

步骤 1 Battery

添加评论

步骤 2

添加评论

步骤 3

添加评论

步骤 4

添加评论

步骤 5

添加评论

步骤 6 Battery screw 2

添加评论

步骤 7

添加评论

步骤 8 Motor

添加评论

步骤 9

添加评论

步骤 10

添加评论

作者

John Czerkawski

团队

USF Tampa, Team S10-G1, Thompson Fall 2017 USF Tampa, Team S10-G1, Thompson Fall 2017 的会员

0条评论

添加评论

嵌入本指南

预览