Dyson DC56 Attachments Replacement

简介

The attachment holder is important to keep the attachment steady while using the vacuum. Without a proper way to hold attachments the vacuum can become unusable.

你所需要的

步骤 1 Dust Bin

Dyson DC56 Attachments Replacement, Dust Bin: 步骤 1 中的图像 1，1

Make sure the vacuum is unplugged.
Warning: Avoid pressing the red trigger because it will turn on and begin suction.

翻译

步骤 2

Locate the purple button at the top of the device.

翻译

步骤 3

Separate the device with the purple button.

翻译

步骤 4

Locate the dust bin's red release lever on the side of the device.
Make sure if the dust bin is full you open the vacuum over a trash can.

翻译

步骤 5

Push the red lever to release the dust bin lid.

翻译

步骤 6

Locate the red lever below the vacuum.

翻译

步骤 7

Push the red lever, pull the back up and away from the dust bin to separate them.

翻译

步骤 8 Attachments

Dyson DC56 Attachments Replacement, Attachments: 步骤 8 中的图像 1，1

Locate two screws at the back of the attachment holder.

翻译

步骤 9

Use a T8-Torque screwdriver to take out the two 26mm screws out.

翻译

步骤 10

Loosen the attachment holder by using a metal spudger.

翻译

步骤 11

Remove the attachment holder.

翻译

结论

To reassemble your device, follow these instructions in reverse order.

作者

与4其他贡献者

John Czerkawski

于10/02/17注册

427 声望

创作了4篇指南

徽章: 7

+ 4更多徽章

团队

USF Tampa, Team S10-G1, Thompson Fall 2017 USF Tampa, Team S10-G1, Thompson Fall 2017 的会员

USFT-THOMPSON-F17S10G1

4 名成员

创作了11篇指南

Dyson DC56 Attachments Replacement

简介

你所需要的

步骤 1 Dust Bin

添加评论

步骤 2

添加评论

步骤 3

添加评论

步骤 4

添加评论

步骤 5

添加评论

步骤 6

添加评论

步骤 7

添加评论

步骤 8 Attachments

添加评论

步骤 9

添加评论

步骤 10

添加评论

步骤 11

添加评论

作者

John Czerkawski

团队

USF Tampa, Team S10-G1, Thompson Fall 2017 USF Tampa, Team S10-G1, Thompson Fall 2017 的会员

0条评论

添加评论

嵌入本指南

预览