跳转到主内容
  1. Take off the dust cannister. Remove the suction hose. Remove the suction hose.
    • Take off the dust cannister.

    • Remove the suction hose.

  2. Extract the front filter. Extract the front filter. Extract the front filter.
    • Extract the front filter.

  3. Extract the rear filter. Unscrew the first Torx screw. Unscrew the first Torx screw.
    • Extract the rear filter.

    • Unscrew the first Torx screw.

  4. Optionally, remove the rear filter cover. Optionally, remove the rear filter cover.
    • Optionally, remove the rear filter cover.

  5. Unscrew the 2nd Torx screw. Disassemble the suction hose connection (optional)
    • Unscrew the 2nd Torx screw.

    • Disassemble the suction hose connection (optional)

  6. Macbook 电池维修套装

    起价 $69.99

    Buy Now

    Macbook 电池维修套装

    起价 $69.99

    Buy Now
  7. Remove the wheels. The wheels clip onto the body of the appliance. Unscrew the 4 Torx screws (two in the right and two on the left).
    • Remove the wheels.

    • The wheels clip onto the body of the appliance.

    • Unscrew the 4 Torx screws (two in the right and two on the left).

  8. Open the body of the vacuum cleaner. You can use a multimeter to test the switch.
    • Open the body of the vacuum cleaner.

    • You can use a multimeter to test the switch.

    • Disconnect the brown wire at the switch.

    • Disconnect the blue wire at the single connector by the motor.

    • Lift out the motor.

  9. Open the motor housing (4 clips). Remover the motor from its plastic casing.
    • Open the motor housing (4 clips).

    • Remover the motor from its plastic casing.

    • Disconnect the motor.

  10. disassembly of 2 engine coals (1 Phillips screw per coal) disassembly of 2 engine coals (1 Phillips screw per coal) disassembly of 2 engine coals (1 Phillips screw per coal)
    • disassembly of 2 engine coals (1 Phillips screw per coal)

  11. Worn brush. Opening the brush housing. Opening the brush housing.
    • Worn brush.

    • Opening the brush housing.

  12. Extraction of the brush and spring. Extraction of the brush and spring. Extraction of the brush and spring.
    • Extraction of the brush and spring.

  13. Removing the brush. Removing the brush.
    • Removing the brush.

  14. Soldering a new brush. Soldering a new brush.
    • Soldering a new brush.

结论

To reassemble your device, follow these instructions in reverse order.

6等其他人完成本指南。

特别感谢这些译者︰

100%

这些翻译人员帮助我们修复这个世界! 想要作出贡献?
开始翻译 ›

christophe

于2012年07月14日注册

590 信誉积分

创作了2篇指南

Very useful guide - I treated myself to a new motor as the cost was not much more than the cost of replacement brushes.

Bob - 回复

添加评论

浏览统计数据:

过去的24小时: 1

过去的7天: 18

过去的30天: 99

总计 1,189