跳转到主内容

简介

After multiple uses of your Dyson Multi Floor Upright the filters will begin to wear and become clogged. To get more suction and use out of your vacuum these filters must be replaced every so often.

工具

没有特定工具。

  1. For the main filter, locate the body of the vacuum by looking for the cylinder with the orange top. Use your thumb to press down on the red button towards the back of the orange piece. After pressing down on the red button, the body of the vacuum will easily be removed from the vacuum stand. After pressing down on the red button, the body of the vacuum will easily be removed from the vacuum stand.
    • For the main filter, locate the body of the vacuum by looking for the cylinder with the orange top. Use your thumb to press down on the red button towards the back of the orange piece.

    • After pressing down on the red button, the body of the vacuum will easily be removed from the vacuum stand.

  2. Once the main body of the vacuum is removed, locate the clear handle on the top of the body. There is a purple label that says "Filter". Lift up the clear handle to reveal the main cylindrical filter. Pull out the purple filter piece to replace. Lift up the clear handle to reveal the main cylindrical filter. Pull out the purple filter piece to replace.
    • Once the main body of the vacuum is removed, locate the clear handle on the top of the body. There is a purple label that says "Filter".

    • Lift up the clear handle to reveal the main cylindrical filter. Pull out the purple filter piece to replace.

结论

To reassemble your device, follow these instructions in reverse order.

3等其他人完成本指南。

Nicole Abraham

于2017年01月26日注册

803 信誉积分

创作了5篇指南

团队

Cal Poly, Team 21-2, Maness Winter 2017 Cal Poly, Team 21-2, Maness Winter 2017 的会员

CPSU-MANESS-W17S21G2

4 名成员

创作了5篇指南

添加评论

浏览统计数据:

过去的24小时: 0

过去的7天: 0

过去的30天: 13

总计 2,182