修复你的物品 社区 商店

Dynex DX-WBRDVD1 Optical Drive Replacement

简介

The discdrive is found next to the motherboard and power board inside the device. This guide will take you through the steps of removing the discdrive for replacement.

你所需要的

  1. Dynex DX-WBRDVD1 Optical Drive Replacement, Top Cover: 步骤 1 中的图像 1，2 Dynex DX-WBRDVD1 Optical Drive Replacement, Top Cover: 步骤 1 中的图像 2，2

    • Remove the four 5mm Phillips #1 screws that connect the black outer shell to the silver back of the device.

    翻译

  2. Dynex DX-WBRDVD1 Optical Drive Replacement: 步骤 2 中的图像 1，1

    • Remove the two 5mm screws on the left and right side panels.

    • There is one screw on each side that secures the cover to the body of the device.

    翻译

  4. Dynex DX-WBRDVD1 Optical Drive Replacement: 步骤 3 中的图像 1，1

    • Lift the black cover to a 45 degree angle from the rear of the device and pull the cover away entirely.

    • Check that the power cord is not preventing the device from opening or closing.

    翻译

  5. Dynex DX-WBRDVD1 Optical Drive Replacement, Optical Drive: 步骤 4 中的图像 1，2 Dynex DX-WBRDVD1 Optical Drive Replacement, Optical Drive: 步骤 4 中的图像 2，2

    • Use a Phillips #1 screwdriver to remove the two screws that secure the Optical Drive.

    翻译

  6. Dynex DX-WBRDVD1 Optical Drive Replacement: 步骤 5 中的图像 1，2 Dynex DX-WBRDVD1 Optical Drive Replacement: 步骤 5 中的图像 2，2

    • Detach the tape wires from the motherboard and power board.

    翻译

  7. Dynex DX-WBRDVD1 Optical Drive Replacement: 步骤 6 中的图像 1，2 Dynex DX-WBRDVD1 Optical Drive Replacement: 步骤 6 中的图像 2，2

    • Lift the disc drive up to a 45 degree angle and pull back out of the device shell

    翻译
结论

To reassemble your device, follow these instructions in reverse order.

2等其他人完成本指南。

0条评论

添加评论

浏览统计数据:

过去 24 小时： 2

过去 7 天： 2

过去 30 天： 7

总计 386