跳转到主内容

Dynex DX-WBRDVD1 Cleaning The Optical Lens

你所需要的

  1. Dynex DX-WBRDVD1 Cleaning The Optical Lens, Top Cover: 步骤 1 中的图像 1,2 Dynex DX-WBRDVD1 Cleaning The Optical Lens, Top Cover: 步骤 1 中的图像 2,2
    • Remove the four 5mm Phillips #1 screws that connect the black outer shell to the silver back of the device.

  2. Dynex DX-WBRDVD1 Cleaning The Optical Lens: 步骤 2 中的图像 1,1
    • Remove the two 5mm screws on the left and right side panels.

    • There is one screw on each side that secures the cover to the body of the device.

  3. Dynex DX-WBRDVD1 Cleaning The Optical Lens: 步骤 3 中的图像 1,1
    • Lift the black cover to a 45 degree angle from the rear of the device and pull the cover away entirely.

    • Check that the power cord is not preventing the device from opening or closing.

  4. Dynex DX-WBRDVD1 Cleaning The Optical Lens, Dynex DX-WBRDVD1 Cleaning The Optical Lens: 步骤 4 中的图像 1,2 Dynex DX-WBRDVD1 Cleaning The Optical Lens, Dynex DX-WBRDVD1 Cleaning The Optical Lens: 步骤 4 中的图像 2,2
    • To access the optical lens, pull back the optical drive as shown in the pictures located on the two metal rails.

  5. Dynex DX-WBRDVD1 Cleaning The Optical Lens: 步骤 5 中的图像 1,2 Dynex DX-WBRDVD1 Cleaning The Optical Lens: 步骤 5 中的图像 2,2
    在这个步骤中使用的工具:
    Microfiber Cleaning Cloths
    $3.99
    购买
结论

To reassemble your device, follow these instructions in reverse order.

3等其他人完成本指南。

0条评论

添加评论

浏览统计数据:

过去 24 小时: 0

过去 7 天: 3

过去 30 天: 4

总计 586