简介

This will show you how to remove the outer shell of the Dualshock 4 so you can replace it or get inside the controller.

Unscrew the four 6.5mm screws, using a Phillips-Head screwdriver.
  • Unscrew the four 6.5mm screws, using a Phillips-Head screwdriver.

  • Pry the two halves of the shell apart using a plastic opening tool.

  • Be careful, as there will be a ribbon connecting the inner workings of the controller. It will not separate into two parts just by pulling apart the shell.

添加评论

Pull the ribbon cable out of the motherboard port to fully separate the two halves, using a pair of tweezers.
  • Pull the ribbon cable out of the motherboard port to fully separate the two halves, using a pair of tweezers.

添加评论

结论

To reassemble your device, follow these instructions in reverse order.

David Seale

于2017年10月09日注册

460 信誉积分

创作了2篇指南

团队

USF Tampa, Team S1-G5, Leahy Fall 2017 USF Tampa, Team S1-G5, Leahy Fall 2017 的会员

USFT-LEAHY-F17S1G5

3 名成员

创作了5篇指南

添加评论

浏览统计数据:

过去的24小时: 4

过去的7天: 35

过去的30天: 124

总计 1,024