此翻译由机器生成，尚未经过人工审核。 会说这种语言吗？ 查看评论。
简介
本指南将向你展示如何拆解 DualShock 4 CHU-ZCT2U 控制器，并接触到充电口进行更换。
你所需要的
询问修复机器人
要重新组装设备，请按相反顺序执行这些说明。
16等其他人完成本指南。
团队
USF Tampa, Team S1-G5, Leahy Fall 2017 USF Tampa, Team S1-G5, Leahy Fall 2017 的会员
USFT-LEAHY-F17S1G5
3 名成员
创作了60篇指南
9指南评论
Came in handy, since it’s hard enough to fix a JDM-030. Thanks!
Just did this on my JDM-030 (3rd generation DS4) as well. I would point out that the charge port for the JDM-030 (JDS-030?) looks slightly different and has more of a T-shape than the JDS-040, but aside from that, the instructions are functionally the same.
I will lastly add that having good tweezers is a must: the tweezers my jeweler’s drivers came with were crap and I had to go to the store to buy another pair. Make sure your equipment is solid before assembly.
Tried to replace my usb port with a board that reads “1-981-33-31” from amazon. It was listed as JDS-40 and it does not work. In fact when plugged into a usb port on my laptop the ribbon cable gets noticeably hot but the controller will not power on.
Devin Sidell - 回复 分享
Got the same problem. Any idea?
