Droid Ultra XT1080 Charging Port Replacement

步骤 1 Charging Port

Droid Ultra XT1080 Charging Port Replacement, Charging Port: 步骤 1 中的图像 1，1

Remove SIM card tray from the device with a plastic opening tool.

编辑

步骤 2

Droid Ultra XT1080 Charging Port Replacement: 步骤 2 中的图像 1，1

Once SIM card tray is removed press the spudger between the plastic case and the frame of the device until you hear a snap.
Work your away around the device until all the plastic clips are undone.
Be gentle with the plastic to make sure it doesn't break.

编辑

步骤 3

Droid Ultra XT1080 Charging Port Replacement: 步骤 3 中的图像 1，1

Remove the five screws on top of the device with a T5 Torx.
Remove the single screw holding the camera with a T4 Torx.
Remove the two screws on the bottom of the device with a T5 Torx.

编辑

步骤 4

Droid Ultra XT1080 Charging Port Replacement: 步骤 4 中的图像 1，2

Droid Ultra XT1080 Charging Port Replacement: 步骤 4 中的图像 2，2

Once the screws are removed, use a plastic spudger and lift up the two plastic pieces that were secured by the screws.

编辑

步骤 5

Droid Ultra XT1080 Charging Port Replacement: 步骤 5 中的图像 1，1

Remove the four T5 Torx screws securing the motherboard.

编辑

步骤 6

Droid Ultra XT1080 Charging Port Replacement: 步骤 6 中的图像 1，1

Gently pry the motherboard out of the frame of the device.

编辑

步骤 7

Droid Ultra XT1080 Charging Port Replacement: 步骤 7 中的图像 1，2

Droid Ultra XT1080 Charging Port Replacement: 步骤 7 中的图像 2，2

Once the motherboard is free flip it over on its back so all the components are showing.

编辑

步骤 8

Droid Ultra XT1080 Charging Port Replacement: 步骤 8 中的图像 1，1

To fully replace the charging port you need to desolder the port and solder a new one in.