修复你的物品 社区 商店

Drill Master Heat Gun Motor Replacement

简介

The motor inside the barrel of the gun powers the fan. Use this guide to replace the motor.

你所需要的

  1. Drill Master Heat Gun Motor Replacement, Motor: 步骤 1 中的图像 1，1

    • Be sure the heat gun is unplugged before starting this process.

    • Remove the seven 14mm screws from the side of the drill using the PH#0 screwdriver.

    • You will need a screwdriver extension.

    编辑

  2. Drill Master Heat Gun Motor Replacement: 步骤 2 中的图像 1，1

    • Remove the 8mm screw from underside of barrel using the PH#0 screwdriver.

    • Don't try to open the casing just yet.

    编辑

  3. Drill Master Heat Gun Motor Replacement: 步骤 3 中的图像 1，3 Drill Master Heat Gun Motor Replacement: 步骤 3 中的图像 2，3 Drill Master Heat Gun Motor Replacement: 步骤 3 中的图像 3，3

    • Remove the barrel casing on either end by twisting and pulling each side off.

    编辑

  4. Drill Master Heat Gun Motor Replacement: 步骤 4 中的图像 1，1

    • Remove the top casing to reveal inside of drill. You might have to tug a little harder for this one.

    编辑

  6. Drill Master Heat Gun Motor Replacement: 步骤 5 中的图像 1，1

    • Remove the metal casing and fan cover from the fan unit.

    编辑

  7. Drill Master Heat Gun Motor Replacement: 步骤 6 中的图像 1，1

    • Bend the metal prongs backward that connect the fan motor to the plastic cap.

    • Bending the brackets too far back can cause the brackets to break.

    编辑

  8. Drill Master Heat Gun Motor Replacement: 步骤 7 中的图像 1，1

    • Remove the plastic cap from the motor,

    • This will allow you to work only with the motor and fan.

    编辑

  9. Drill Master Heat Gun Motor Replacement: 步骤 8 中的图像 1，1

    • Remove the fan by pulling it from the motor rod.

    编辑

  10. Drill Master Heat Gun Motor Replacement: 步骤 9 中的图像 1，1

    • Remove the two 12mm screws from the plastic fan casing using PH#00

    编辑

  11. Drill Master Heat Gun Motor Replacement: 步骤 10 中的图像 1，1

    • Remove the plastic fan casing.

    编辑

  12. Drill Master Heat Gun Motor Replacement: 步骤 11 中的图像 1，1

    • Remove the metal casing from the motor and insert the new motor in its place.

    • You may have to tug a little.

    编辑
结论

To reassemble your device, follow these instructions in reverse order.

另外一个人完成了本指南。

一条评论

Where can I find a new motor?

jstabler38 - 回复

添加评论

浏览统计数据:

过去 24 小时： 0

过去 7 天： 1

过去 30 天： 12

总计 1,444