修复你的物品 社区 商店

Drill Master Heat Gun Fan Replacement

简介

The internal fan keeps your machine from overheating. A faulty fan can also cause smoking. To remedy these problems, use this guide to replace your fan.

你所需要的

  1. Drill Master Heat Gun Fan Replacement, Fan: 步骤 1 中的图像 1，1

    • Be sure the heat gun is unplugged before starting this process.

    • Remove the seven 14mm screws from the side of the drill using the PH#0 screwdriver.

    • You will need a screwdriver extension.

    编辑

  2. Drill Master Heat Gun Fan Replacement: 步骤 2 中的图像 1，1

    • Remove the 8mm screw from underside of barrel using the PH#0 screwdriver.

    • Don't try to open the casing just yet.

    编辑

  3. Drill Master Heat Gun Fan Replacement: 步骤 3 中的图像 1，3 Drill Master Heat Gun Fan Replacement: 步骤 3 中的图像 2，3 Drill Master Heat Gun Fan Replacement: 步骤 3 中的图像 3，3

    • Remove the barrel casing on either end by twisting and pulling each side off.

    编辑

  5. Drill Master Heat Gun Fan Replacement: 步骤 4 中的图像 1，1

    • Remove the top casing to reveal inside of drill. You might have to tug a little harder for this one.

    编辑

  6. Drill Master Heat Gun Fan Replacement: 步骤 5 中的图像 1，1

    • Remove the metal casing and fan cover from the fan unit.

    编辑

  7. Drill Master Heat Gun Fan Replacement: 步骤 6 中的图像 1，1

    • Bend the metal prongs backward that connect the fan motor to the plastic cap.

    • Bending the brackets too far back can cause the brackets to break.

    编辑

  8. Drill Master Heat Gun Fan Replacement: 步骤 7 中的图像 1，1

    • Remove the plastic cap from the motor,

    • This will allow you to work only with the motor and fan.

    编辑

  9. Drill Master Heat Gun Fan Replacement: 步骤 8 中的图像 1，1

    • Remove the fan by pulling it from the motor rod and replace.

    编辑
结论

To reassemble your device, follow these instructions in reverse order.

0条评论

添加评论

浏览统计数据:

过去 24 小时： 3

过去 7 天： 7

过去 30 天： 17

总计 2,416