Dremel 4000 Back Case Replacement - iFixit 维修指南

简介

This is a prerequisite guide only. In the following steps, you will remove two exterior parts, then remove the screws that hold the casing together.

你所需要的

步骤 1 Back Case

Dremel 4000 Back Case Replacement, Back Case: 步骤 1 中的图像 1，2

Dremel 4000 Back Case Replacement, Back Case: 步骤 1 中的图像 2，2

Start by removing the housing cap by unscrewing it.
Next, unscrew the now exposed collet nut while holding down the shaft lock button.
To remove the collet nut, you may need to use the small open-end wrench provided with the Dremel.

步骤 2

Dremel 4000 Back Case Replacement: 步骤 2 中的图像 1，1

Using your hands, carefully remove hanger from casing.

步骤 3

Dremel 4000 Back Case Replacement: 步骤 3 中的图像 1，2

Dremel 4000 Back Case Replacement: 步骤 3 中的图像 2，2

Remove the brush caps (one on each side) by using a flathead screwdriver bit.
The brush caps are spring loaded.

步骤 4

Dremel 4000 Back Case Replacement: 步骤 4 中的图像 1，1

Using the Torx 15 screwdriver tip, remove the 5 screws (12.5 mm) that hold the casing together.

步骤 5

Dremel 4000 Back Case Replacement: 步骤 5 中的图像 1，1

Use a plastic opening tool to gently wedge apart the hard plastic threads.

步骤 6

Dremel 4000 Back Case Replacement: 步骤 6 中的图像 1，1

Use your hands to carefully remove the back casing so that none of the components fall out.

结论

To reassemble your device, follow these instructions in reverse order.

2等其他人完成本指南。

作者

与2其他贡献者

John Cobb

于01/20/16注册

1,689 声望

创作了4篇指南

+ 18更多徽章

团队

USF Tampa, Team 15-4, Remmell Spring 2016 USF Tampa, Team 15-4, Remmell Spring 2016 的会员

USFT-REMMELL-S16S15G4

4 名成员

创作了13篇指南

0条评论

浏览统计数据:

过去 24 小时： 0

过去 7 天： 1

过去 30 天： 8

总计 1,656