你所需要的
-
-
-
Remove the green board with the controls first.
-
DON'T USE FORCE, it should get lose easily. Don't bend the cables too much.
-
Remove the cable from the control board
-
Lift the display off, don't bed the cable too much.
-
Open the connector of the cable carefully. Don't scratch the board and don't use too much force. Ideally, use a plastic spudger of the ifixit-kit
-
The display got removed, not just fit the new display in reveresed order.
-
Follow the steps in reverse order to reassemble.
Follow the steps in reverse order to reassemble.
3等其他人完成本指南。
由衷感谢以下译者:
100%
这些译者帮助我们修补全世界! 您也想加入吗?
开始翻译 ›