跳转到主内容

修复你的物品

维修的权力

商店

简介

This guide is a complete, all-around guide to disassembling this model laptop. Use this guide to replace any of the parts in the laptop. Stop when you get to the part you want to replace and simply follow the guide backwards from where you stopped to reassemble your device.

配件

没有特定配件。

  1. Remove the 8 small screws.
    • Remove the 8 small screws.

  2. Remove the other 6 screws. Remove the hard disk and the RAM slots.
    • Remove the other 6 screws.

    • Remove the hard disk and the RAM slots.

  3. This is the hard disk - Hitachi 500 GB
    • This is the hard disk - Hitachi 500 GB

  4. Ensure that the hard disk has been removed. Carefully detach the bottom cover.
    • Ensure that the hard disk has been removed. Carefully detach the bottom cover.

  5. Once the bottom cover is removed, your device should look like this.
    • Once the bottom cover is removed, your device should look like this.

  6. Remove the 4 screws to detach the battery.
    • Remove the 4 screws to detach the battery.

    • Remove all of the sticky tape.

    • Carefully disconnect the small power connector by using a tool to push the connector out through the small gap in the middle of the connector.

    • The connector won't come out all the way, because the battery pack is in its way.

  7. 跳过升级

    通过使用多合一工具包维修可以节省成本。

    购买 iPhone 维修工具套装

    跳过升级

    通过使用多合一工具包维修可以节省成本。

    购买 iPhone 维修工具套装
  8. This is the Samsung 7.4V 45Wh battery. Ensure that the battery is removed before continuing.
    • This is the Samsung 7.4V 45Wh battery.

    • Ensure that the battery is removed before continuing.

  9. When the battery is removed, this is how it will look.
    • When the battery is removed, this is how it will look.

  10. Remove the processor fan.
    • Remove the processor fan.

    • There are 2 screws holding it in place. Loosen and remove them.

  11. This is the processor fan.
    • This is the processor fan.

  12. Remove the processor heat sink.
    • Remove the processor heat sink.

    • 3 screws hold this part in place. Loosen and remove them.

  13. Disconnect the antenna cables from the WiFi card.
    • Disconnect the antenna cables from the WiFi card.

    • Remove the screw.

    • Be sure to match the colors when reattaching the cables.

  14. Remove the screw.
    • Remove the screw.

    • Lift the latch upwards to loosen the cable.

  15. Remove the screw.
    • Remove the screw.

  16. Remove the screw.
    • Remove the screw.

  17. To remove the Motherboard, carefully disconnect the cables.
    • To remove the Motherboard, carefully disconnect the cables.

  18. This is the Motherboard - there is a front and rear view. This is the Motherboard - there is a front and rear view.
    • This is the Motherboard - there is a front and rear view.

结论

To reassemble your device, follow these instructions in reverse order.

31等其他人完成本指南。

Jose Gustavo Abreu Murta

于2010年07月06日注册

2,827 信誉积分

创作了7篇指南

Hello,

Do you know where can i reset the Bios CMOS in that motherboard?

I think there are people who wants to know becose system upgrade is leading to bios ACPI Error.

Thanks for your help

Luis Orland - 回复

No, I do not know where is a reset pin of BIOS.

Try to disconnect NVRAM battery.

Wait 15 minutes and reconnect again.

Jose Gustavo Abreu Murta - 回复

To reset BIOS this NP530U3, only disconnect all power supply (MAIN battery, CMOS battery and power source). And hold press POWER button for 1 min.

warmdk - 回复

I try it but don't work, do you know another way to do this

manhique -

Hello,

I have seen many screens with model number LTN140AT21-XXX for this laptop. My laptop NP530u4b has a screen LTN140AT21-802. I would like to know if I can use a LTN140AT21-002 screen, or if only is good a screen with number LTN140AT21-8.

thanks for your help.

alex - 回复

添加评论

浏览统计数据:

过去的24小时: 1

过去的7天: 30

过去的30天: 139

总计 48,449