Disassembling iRobot Roomba 551 Bottom Plate - iFixit 维修指南

本指南有最近更改，您可查看未经巡查的最新版本。

简介

The bottom of your Roomba can be easily removed by just removing the side brush, unscrewing four screws, and separating the plate from the device.

你所需要的

步骤 1 Side Brush

Disassembling iRobot Roomba 551 Bottom Plate, Side Brush: 步骤 1 中的图像 1，1

Place your Roomba upside-down on a hard surface.

步骤 2

Disassembling iRobot Roomba 551 Bottom Plate: 步骤 2 中的图像 1，1

While holding the side brush in place, use a Phillips #1 screwdriver to remove the 4.5mm screw from the center of the brush.

步骤 3

Disassembling iRobot Roomba 551 Bottom Plate: 步骤 3 中的图像 1，1

Gently pull upwards on the brush to remove it.

步骤 4 Bottom Plate

Disassembling iRobot Roomba 551 Bottom Plate, Bottom Plate: 步骤 4 中的图像 1，1

Rotate the Roomba upside-down so the bottom is facing towards you.

步骤 5

Disassembling iRobot Roomba 551 Bottom Plate: 步骤 5 中的图像 1，2

Disassembling iRobot Roomba 551 Bottom Plate: 步骤 5 中的图像 2，2

Using a Phillips #2 screwdriver, remove the captive screws that hold the bottom plate in place.

步骤 6

Disassembling iRobot Roomba 551 Bottom Plate: 步骤 6 中的图像 1，1

Carefully lift the bottom plate.
The battery is only secured in place by the bottom plate, and may fall out once the bottom plate is removed.

结论

To reassemble your device, follow these instructions in reverse order.

作者

与5其他贡献者

Deborah Newberry

于01/23/14注册

623 声望

创作了4篇指南

+ 12更多徽章

团队

Cal Poly, Team 13-14, Regan Winter 2014 Cal Poly, Team 13-14, Regan Winter 2014 的会员

CPSU-REGAN-W14S13G14

4 名成员

创作了19篇指南

0条评论

浏览统计数据:

过去 24 小时： 0

过去 7 天： 8

过去 30 天： 47

总计 2,257