跳转到主内容

配件

没有特定配件。

  1. 这个步骤还没有翻译 帮忙翻译一下

    Flip the toy over, so that the keypad is facing away from you. Remove two Phillips-head screws.
    • Flip the toy over, so that the keypad is facing away from you.

    • Remove two Phillips-head screws.

    • Insert a plastic spudger (or 4!) into the marked holes, and push down and towards the edge to release each catch.

    • It's possible to release each catch one-at-a-time, but easier if you have 4 tools and do them simultaneously.

    • This requires quite a bit of force; be careful.

  2. 这个步骤还没有翻译 帮忙翻译一下

    Separate the two halves of the case to expose the inner PCB, speaker and battery holder.
    • Separate the two halves of the case to expose the inner PCB, speaker and battery holder.

终点

bushing

于2010年04月23日注册

10,057 信誉积分

创作了13篇指南

I got one of these. I've opened the case and the battery connections are silver and show no corrosion at all. I replaced the batteries, swapped out one of the Word Modules. I got a bit of static once, but now nothing. All the wire connection soldering looks fine. Any ideas?

stevehelium@gmail.com

Stephen Henderson - 回复

添加评论

浏览统计数据:

过去的24小时: 1

过去的7天: 6

过去的30天: 20

总计 4,165