修复你的物品 社区 商店

Disassembling Sony Vaio VGN-FW 590 Audio USB Board

简介

This a simple process requiring only a small Phillips screwdriver and a slim flathead.

Note: A few trays for the screws, a wristband and an anti-static surface mat are ideal for safe handling of sensitive electronics.

你所需要的

  1. Disassembling Sony Vaio VGN-FW 590 Audio USB Board, Audio USB Board: 步骤 1 中的图像 1，1

    • - Remove battery.

    • - Remove memory tray door (1 Screw).

    • - Remove hard drive door (1 Screw).

    • - Remove hard drive (3 Screws).

    编辑

  2. Disassembling Sony Vaio VGN-FW 590 Audio USB Board: 步骤 2 中的图像 1，1

    • - Remove all screws from the bottom cover. There are three types of screws. Marked here with Red Circles, Red Squares and Orange Circles.

    编辑

  3. Disassembling Sony Vaio VGN-FW 590 Audio USB Board: 步骤 3 中的图像 1，1

    • - Remove CD/DVD Drive by sliding it out.

    • - Remove three more screws, which were hiding under the DVD drive.

    编辑

  5. Disassembling Sony Vaio VGN-FW 590 Audio USB Board: 步骤 4 中的图像 1，1

    • - Carefully remove the cover, by unpopping it with a slim flathead, slide it out away from the RJ-45, HDMI and VGA ports.

    编辑

  6. Disassembling Sony Vaio VGN-FW 590 Audio USB Board: 步骤 5 中的图像 1，1

    • - The audio/usb interface card is now within reach. Just remove the two screws and carefully slide out the flat connector to remove the card.

    编辑

  7. Disassembling Sony Vaio VGN-FW 590 Audio USB Board: 步骤 6 中的图像 1，1

    • - Fire up the air compressor and blow out dust from the fan and heatsinks.

    编辑

  8. Disassembling Sony Vaio VGN-FW 590 Audio USB Board: 步骤 7 中的图像 1，1

    • - If you are replacing your RAM, simply unpop the four latches and slide out the memory sticks.

    编辑
结论

To reassemble your device, follow these instructions in reverse order.

8等其他人完成本指南。

作者

与2其他贡献者

Artem Nikulkov

于10/22/10注册

313 声望

撰写一个指南

徽章: 6

+ 3更多徽章

0条评论

添加评论

浏览统计数据:

过去 24 小时： 0

过去 7 天： 2

过去 30 天： 9

总计 21,090