跳转到主内容

本指南有最近更改,您可查看未经巡查的最新版本

Disassembling Sony Ericsson w600i LCD Section

你所需要的

  1. Disassembling Sony Ericsson w600i LCD Section, Disassembling Sony Ericsson w600i Battery Cover: 步骤 1 中的图像 1,1
    • Grip the lower portion of the back of the phone and slide downwards.

  2. Disassembling Sony Ericsson w600i LCD Section, Battery: 步骤 2 中的图像 1,1
    • Lift battery at the rounded notch near the bottom of the phone.

  3. Disassembling Sony Ericsson w600i LCD Section, Back housing: 步骤 3 中的图像 1,1
    • Unscrew the four Torx screws from the backplate.

    • The backplate may begin to separate from the keypad face. Do not try to remove it yet.

    • The screws are T5 Torx screws, 5.6mm.

  4. Disassembling Sony Ericsson w600i LCD Section: 步骤 4 中的图像 1,1
    • Swivel the phone open.

  5. Disassembling Sony Ericsson w600i LCD Section: 步骤 5 中的图像 1,1
    • Using the Spudger, gently pry up the U-shaped grey cover below the keypad.

    • The cover is secured with adhesive tape. The gentler this is removed, the easier it will be to reassemble.

  6. Disassembling Sony Ericsson w600i LCD Section: 步骤 6 中的图像 1,1
    • Remove the two Torx screws from below the cover.

    • These are T5 Torx screws, 8.6mm.

  7. Disassembling Sony Ericsson w600i LCD Section: 步骤 7 中的图像 1,1
    • Gently work a spudger or a fingernail between the keypad face and the backplate.

    • The pieces are clipped together most tightly at the bottom loop section.

  8. Disassembling Sony Ericsson w600i LCD Section: 步骤 8 中的图像 1,2 Disassembling Sony Ericsson w600i LCD Section: 步骤 8 中的图像 2,2
    • Separate the keypad face from the backplate.

    • The keypad keys and the button component are both loose inside the phone, so take note of their orientation in case they become dislodged.

    • Take note of the braided cord's state. Upon reassembly it should be returned to the same orientation.

  9. Disassembling Sony Ericsson w600i LCD Section: 步骤 9 中的图像 1,3 Disassembling Sony Ericsson w600i LCD Section: 步骤 9 中的图像 2,3 Disassembling Sony Ericsson w600i LCD Section: 步骤 9 中的图像 3,3
    • Holding the backplate away from the swivel, remove the 4 small Phillips screws and both stamped struts from the swivel assembly.

    • Note that only the bottom strut has a tab.

    • The screws are Phillips, 2.9mm

  10. Disassembling Sony Ericsson w600i LCD Section: 步骤 10 中的图像 1,1
    • The back housing is now disassembled, and the swivel assembly is revealed.

  11. Disassembling Sony Ericsson w600i LCD Section, LCD Section: 步骤 11 中的图像 1,2 Disassembling Sony Ericsson w600i LCD Section, LCD Section: 步骤 11 中的图像 2,2
    • Remove the four black Phillips screws holding the swivel assembly to the LCD section of the phone.

    • Be mindful of the screws, as they are very small.

    • The screws are Phillips, 2.4mm

  12. Disassembling Sony Ericsson w600i LCD Section: 步骤 12 中的图像 1,1
    • Gently remove the grey plastic cover at the top-rear of the LCD section with a spudger.

    • It is secured with adhesive tape, the more gently you remove this piece, the easier reassembly will be later.

  13. Disassembling Sony Ericsson w600i LCD Section: 步骤 13 中的图像 1,1
    • Remove the two Torx screws revealed under the grey cover.

    • The screws are Torx T5, 5.6mm

  14. Disassembling Sony Ericsson w600i LCD Section: 步骤 14 中的图像 1,1
    • Gently pry off the front face, starting at the bottom slot.

  15. Disassembling Sony Ericsson w600i LCD Section: 步骤 15 中的图像 1,1
    • Remove the Torx screws near the buttons.

    • The screws are Torx T5, 5.6mm

  16. Disassembling Sony Ericsson w600i LCD Section: 步骤 16 中的图像 1,2 Disassembling Sony Ericsson w600i LCD Section: 步骤 16 中的图像 2,2
    • Remove the black front plate.

    • Remove the button overlay, taking note of its position for reassembly. There are small grey nubs that correspond to holes in the overlay.

  17. Disassembling Sony Ericsson w600i LCD Section: 步骤 17 中的图像 1,1
    • Gently release the small grey retaining clips around the outside of the display assembly.

    • Separate the display assembly from its backplate.

    • Take care; some of the side buttons may dislodge as the backplate is separated.

    • The LCD section is now disassembled.

结论

To reassemble your device, follow these instructions in reverse order.

另外一个人完成了本指南。

Beau Blanchard

于09/30/12注册

20 声望

创作了6篇指南

团队

University of Maine, Team 1-5, Diaz Fall 2012 University of Maine, Team 1-5, Diaz Fall 2012 的会员

UMAINE-DIAZ-F12S1G5

1 名成员

创作了12篇指南

0条评论

添加评论

浏览统计数据:

过去 24 小时: 0

过去 7 天: 0

过去 30 天: 1

总计 657